Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Kewtech KT1795 Two Pole Voltage and Continuity Tester with LCD Readout
- Ghost voltage clearance function
- Required for correct safe isolation procedure
- Fits into recessed terminals such as RCBOs without unscrewing any caps
SKU
KT1795
MPN
KT1795
A two-pole voltage and continuity tester is an essential tool in every electrician's toolbox used for voltage indication and the safe isolation of live circuits. The Kewtech KT1795 will indicate voltage is present even with no batteries or if the batteries go flat so you can have peace of mind of indication when working with live circuits.
Key Benefits
- Required for correct safe isolation procedure
- Ghost voltage clearance function
- Permanent UK Specific GS38 Slender probe tips NO NEED to swap ends
- Fits into recessed terminals such as RCBOs without unscrewing any caps
- IP64
- Designed to the new international safety standards IEC 61243-3 & IEC 61010-1
- Cat IV 600V, Cat III 1000V
Key Features
- Diode test
- Data Hold
- Continuity Test
- Clear audible tone
- Polarity indication
- Auto power on/off
- Self-diagnostic test
- 1V LCD resolution display
- AC voltage range 6V - 1000V
- DC voltage range 6V - 1500V
- Bright LEDs indicate the voltage level
- Bright torch light - gives ample illumination
- Single pole voltage detection on both probes
- Phase rotation - Bright green LEDs show left or right rotation
- Push buttons to increase the testing load to clear ghost voltages
£92.99
£111.59 inc vat
Stock Due:
Typically 1-6 Days
Technical Information
Specification
| KT1795 Voltage Detector | |
|---|---|
| LED Nominal Voltage | 12/24/50/120/230/400/690/ 1000V, AC(40…400Hz), DC(±) |
| LED Tolerances | EN 61243-3 |
| ELV Indication LED | >50V AC, >120V DC |
| Response Time | <1s at 100% of each nominal value |
| LCD Range | 6…1000VAC, 1500VDC(±) |
| LCD Resolution | 1V |
| LCD Accuracy | ±3%±3dgt (6…1000Vac/1500Vdc) |
| LCD Overrange Indication | "OL" |
| Peak Current with Push Buttons Not Pressed | Is <3.5mA (at 1000V) |
| Peak Current with Push Buttons Pressed | Is <300 mA |
| Measurement Duty | 30s ON, 240s OFF |
| SINGLE POLE PHASE TEST | |
| Voltage Range | 100…1000V AC (50/60Hz ) |
| PHASE ROTATION TEST | |
| System | 170…1000V phase-to-phase, AC 50/60Hz |
| CONTINUITY TEST | |
| Continuity Test Range | 0…500 kΩ + 50% |
| Resistance Measurement | 0-1999Ω ±(5% + 10dgt) Resolution: 1Ω |
| GENERAL | |
| Temperature | -5…40°C operation -20…70°C storage No condensation |
| Humidity | max. 85% RH |
| Altitude | up to 2000m |
| Overvoltage | CAT. III 1000V/ CAT. IV 600V |
| Standard | EN/IEC 61243-3:2014 |
| Pollution | Degree 2 |
| Protection | IP64 |
| Battery | 3V (IEC LR03 1.5V x 2) |
| Internal Battery Consumption | approx. 80mA |
Document Downloads
Kewtech KT1795 Two Pole Voltage and Continuity Tester Datasheet
Kewtech KT1795 Two Pole Voltage and Continuity Tester User Manual
Additional Information
SKU
KT1795
Manufacturer Part Code
KT1795
Kewtech KT1795 Two Pole Voltage and Continuity Tester with LCD Readout
£92.99
£111.59 inc vat
£92.99
£111.59 inc vat