or Call 01642 931 329 to discuss product options
The Isotech Isocal 6 Hyperion 4936 Temperature Calibrator is a large-volume, multifunctional temperature calibrator. It is 65mm x 160mm deep, making it ideal for use as a portable liquid bath and enabling highly accurate calibration of awkwardly shaped sensors.
The Isotech Isocal 6 Hyperion 4936 Temperature Calibrator is part of Isotech’s 4000 series of Temperature Calibrators. Please see the video below for a brief introduction to this range.
There are three versions of the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator available. Please see the table below for an overview of the differences between these models.
SKU | IS-4936 | IS-4936S | IS-4936B |
Title | Isotech Isocal 6 Hyperion 4936 - Advanced | Isotech Isocal 6 Hyperion 4936S - Onsite | Isotech Isocal 6 Hyperion 4936B - Basic |
Features | |||
Digital Display of Set and Nominal Block Temperature |
Yes | Yes | Yes |
Full-Colour, High-resolution Display | Yes | No | No |
PC Interface | Ethernet + USB Host | Serial | Serial |
Test Thermostats | Yes - Two Inputs | Yes - Single Input | No |
Independent Temperature Indicator for Reference Probe |
Yes | Yes | No |
Additional Inputs for Units Under Test | Up to 3: Two universal inputs for prt, Thermocouple or Process inputs and a further Thermocouple input | No | No |
Automatic Temperature Cycling | Yes | No | No |
Data Logging | Yes - Export to USB | No | No |
Offset Elimination | Yes - block can follow reference input |
No | No |
Choose English, French, Italian or Spanish Language |
Yes - on full colour display | No | No |
In Built Web Server | Yes | No | No |
Tamper Proof Data | Yes - Suitable for life science, automotive and aerospace applications |
No | No |
The Isotech Isocal 6 Hyperion 4936 Temperature Calibrator has a temperature range of -25°C to +140°C and can calibrate entire measurement loops using a heat source rather than an electrical simulator; this means test instruments and sensors can be calibrated as a system.
Furthermore, the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator supports six calibration modes:
- Dry Block/ Metal Block Bath (default)
- Stirred Liquid Bath
- Stirred Ice/ Water Bath
- Blackbody Source
- Surface Sensor Calibration
- ITS-90 Fixed Point (this mode provides an uncertainty of 0.001°C)
Additional accessories are required to convert the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator for use in Blackbody Source, Surface Sensor Calibration and ITS-90 Fixed Point mode. Moreover, when used as a liquid bath, the fluid can be poured directly into the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator’s block or into a liquid container. Pouring liquid directly into the block removes the need for specially drilled blocks, however, liquid containers enable rapid change of fluids. When using the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator with a liquid container, dry block insert, blackbody target or surface sensor kit, it is recommended that a separate reference thermometer is used to compensate for varying offsets between the controller and accessory temperature.
When used as a stirred liquid bath, the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator can provide accuracies of up to 0.005°C (using a reference thermometer) and can calibrate temperature sensors in all shapes and sizes. In Dry Block mode, because the Isotech Isocal 6 Hyperion 4936 Temperature Calibrator has a depth of 65mm, it can be used to calibrate larger probes or multiple sensors simultaneously.
The Isotech Isocal 6 Hyperion 4936 Temperature Calibrator is a versatile, precise and portable liquid bath ideal for accurately calibrating awkwardly shaped sensors.
Modes of Operation
Please see the videos below for an introduction to Isotech Isocal 6 Hyperion 4936 Temperature Calibrator’s six modes of operation.
Dry Block/ Metal Block Bath
Stirred Liquid Bath
Stirred Ice/ Water Bath
Blackbody Source
Surface Sensor Calibrator
ITS-90 Fixed Point
Isotech Isocal 6 Hyperion 4936B Temperature Calibrator Key Features
- A large-volume, multifunctional temperature calibrator ideal for use as a portable liquid bath
- 65mm x 160mm deep
- Calibrate awkwardly shaped sensors accurately
- Three versions available: Basic, Onsite and Advanced (see table above)
- Temperature range: -25°C to +140°C
- Calibrates entire measurement loops using a heat source rather than an electrical simulator
- Test instruments and sensors can be calibrated as a system
- Six modes of operation
- Dry Block/ Metal Block Bath mode (default)
- Stirred Liquid Bath mode (provides accuracies up to 0.005°C when used with a reference thermometer)
- Stirred Ice/ Water Bath mode
- Blackbody Source mode
- Surface Sensor Calibration mode
- ITS-90 Fixed Point mode (this mode provides an uncertainty of 0.001°C)
- Additional accessories are required for Blackbody Source, Surface Sensor Calibration and ITS-90 Fixed Point modes
- When used as a liquid bath, fluid can be poured directly into the block or into a fluid container
- Pouring liquid directly into the block removes the need for specially drilled blocks
- Liquid containers enable rapid change of fluids
- A separate reference thermometer should be used with a liquid container, dry block insert, blackbody target or surface sensor kit
- Calibrate sensors of all types, shapes and sizes in Stirred Liquid Bath mode
- Calibrate larger probes in Dry Block mode
- Calibrate multiple sensors simultaneously in Dry Block mode
- A versatile, precise and portable liquid bath
- Ideal for accurately calibrating awkwardly shaped sensors
What’s Included?
- Your Choice of Isotech Isocal 6 Hyperion 4936 Temperature Calibrator with Corresponding Accessories
SKU | Title | What's Included? |
IS-4936B | Isotech Isocal 6 Hyperion 4936B - Basic |
Supply Voltage: 108/130V or 208/240v 50/60Hz - Please Specify |
IS-4951S | Isotech Isocal 6 Hyperion 4936S - Onsite |
Supply Voltage: 108/130V or 208/240v 50/60Hz - Please Specify |
IS-4951 | Isotech Isocal 6 Hyperion 4936 - Advanced |
Supply Voltage: 108/130V or 208/240v 50/60Hz - Please Specify |
Isotech Isocal 6 Hyperion 4936 Temperature Calibrator Technical Specifications
Temperature Range | -25°C to 140°C1 |
Advanced Range | |
Stability: Dry Block / Liquid Bath | ±0.005°C |
Display Resolution | 0.001°C over whole range |
Accuracy: RTD Input Channels | ±0.05°C ±0.005% RDG |
Accuracy: Thermocouple Input Channels | E,J,K,N: ±0.2°C @ 660°C R: ±0.6°C S: ±0.7°C @ 660°C T ±0.2°C @ 150°C |
CJC Accuracy | ±0.35°C |
Basic/ Site Range | |
Stability | ±0.03°C |
Display Resolution | 0.01°C from -19.99 to 99.99°C then 0.1C: 0.01°C Over PC Interface |
Common Specifications | |
Stability | Blackbody ±0.3°C Surface Sensor ±0.5°C ITS-90 Cells ±0.0005°C |
Display Accuracy 3 | 0.15°C |
Uniformity - Radial, Liquid Bath Mode | <0.009°C |
Uniformity - Axial, Liquid Bath Mode (40mm) |
<0.011°C |
Uniformity - Radial, Dry Block Mode (Between Wells) |
<0.008°C |
Uniformity - Axial, Dry Block Mode (40mm) |
<0.040°C |
Heating Time | -20°C to 140°C: 40 Mins |
Cooling Time | 140°C to 20°C: 90 Mins |
20°C to -25°C: 80 Mins | |
Insert Size | 65 x 160mm |
Insert Types | Standard 8 x 8mm + 2 x 4.5mm, Undrilled or Custom Drilled |
Power | 115 or 230Vac 50/60Hz 200 Watts |
Dimensions | 384H (including handle) x 212W x 312D mm |
Weight | 12kg |
Notes | (1) In ambient of 20°C: Minimum Temperature is 45°C Below Ambient, Absolute Minimum -35°C |
(2) In ambient of 20°C | |
(3) Dry Block Mode only: Comparing 4.5mm Well to Display Value. |
Reviews
SKU | IS-4936X |
---|