Fluke 62 MAX Infrared Thermometer

Reading temperature levels in a wide variety of applications doesn't have to be difficult - with the Fluke 62 MAX infrared thermometer, you can get quick, accurate and reliable measurements of surface temperatures without the need to make direct contact.

You can use the Fluke 62 MAX infrared thermometer anywhere; these units are made tough with dust and water resistance as well as ultra-durable casing which can withstand a drop from a height of up to 3m. There's a reason why this thermometer's tagline is 'Handle Without Care' - take a look at the video below to see how useful and durable this infrared (IR) thermometer really is.

Precise, Reliable Non-Contact Temperature Measurements

Making a measurement with the Fluke 62 MAX is simple - just use the built-in precision laser point to determine your measurement point and the thermometer will quickly determine surface temperature with a high degree of accuracy.

There's many benefits to using the Fluke 62 MAX for your temperature measurements, including:

• Wide Temperature Measurement Range - the 62 MAX can measure temperature levels in Celsius or Fahrenheit from -30 to 500°C (-22 to 932°F)
• Accurate, Reliable Temperature Measurements - ±1.5°C or ±1.5% of reading typical accuracy
• Fast Temperature Measurements - responds with a temperature measurement in under 500ms
• 10:1 Distance-To-Spot Ratio with Laser Pointer - hold the thermometer approximately 10 inches away for a 1 inch measurement spot
• MIN, MAX, AVG and DIF modes - displays the minimum, maximum or average temperature, or the difference between two measurements
• Hi and Lo Alrms - rapid indication when measurements are outside limits
• Durable Design - IP54 rated for dust and water resistance and rugged enough to withstand drops from a height of 3m
• Small, Lightweight Design - clips onto your toolbelt or belt loop, or easily fits in your toolbox
• Large Size, Backlit Screen - read your data easily no matter what conditions you find yourself in

Ideal for Any HVAC Application

Reliable temperature measurements go hand-in-hand with HVAC work; thankfully, Fluke's 62 MAX thermometer delivers the accuracy and reliability you need.

This infrared thermometer is suitable for many different HVAC applications, including:

• Checking Discharge Air Temperature - easily check the discharge air temperature of an HVAC unit with ceiling discharge while standing on the ground (no ladders needed!)
• Check Thermostat Accuracy - put a value on the temperature output of your thermostats and make adjustments as necessary
• Check Inlet/Outlet Water Temperatures - non-contact measurements of water inlets and coil outlets are quick and easy with the 62 MAX. Ideal for determining correct water temperatures, heat transfer and valve operation
• Check Air Handler Coil Temperatures - specific coil temperatures should be present on these systems; use the 62 MAX to check if it's working like it should
• Examine Hot Water Boiler Temperature - see how hot or cold water from a boiler is and identify potential energy saving procedures
• Steam Trap Checks - find failed open/closed steam traps and take action
• Air Distribution Checks - a room or a space may have several air distribution ducts - with the 62 MAX, you can identify ducts which aren't working or show incorrect temperatures

Upgrade to the 62 MAX+ >>

Why not also consider upgrading to Fluke's 62 MAX+ model instead?

It may look the same as the standard 62 MAX, but the Plus model has even higher accuracy, wider temperature range and a number of other benefits.

This table shows the difference between each.