What's New?
Fluke has updated the T150 Two-Pole Voltage and Continuity Tester to include the following:
- Improved safety features, including a CableHealth function (see below)
- Cable able to withstand 5000 bend cycles in both directions to 150°, exceeding the EN 61243-3 standard by up to three times (see the video below)
- Rugged design: the most durable Fluke Two-Pole Voltage Testers to date
NEW CableHealth Function
As mentioned above, the Fluke T150 Two-Pole Voltage and Continuity Tester has been updated to include improved safety features, one such feature is a CableHealth function. This function continuously and automatically checks the condition of the Fluke T150's test lead giving the user peace of mind that his/her two-pole voltage/ continuity tester is operating safely and correctly and is issuing reliable results.
As this function operates continuously and automatically in the background, requiring no input from the operator, it will verify the soundness and continuity of the Fluke T150’s test lead before, during and after measurements.
If the test lead is in good health the CableHealth indicator will not illuminate; however, if this red band lights up the user will know immediately that there is a fault with his/her test lead. The CableHealth function will issue this visual alert even if it detects an intermittent failure, ensuring that the user is always informed of the condition and therefore safety and reliability of his/her Fluke T150 Two-Pole Voltage and Continuity Tester.
This NEW CableHealth function has been integrated into the Fluke T150 Two-Pole Voltage and Continuity Tester to allow electricians to work safer and more reliably.
Fluke T150 Two-Pole Voltage/Continuity Tester Overview
The best overall model in Fluke's range of two-pole voltage and continuity testers!
Fluke's T150 Two-Pole Voltage Tester includes all of the functionality found on the T90, T110 and T130, plus an exclusive resistance measurement mode, allowing it to be used to measure and display resistance up to 1999Ω.
Fluke T-series voltage and continuity testers are made with Fluke's world-renowned quality; these testers are an absolute must for professional electricians and are among one of the most popular products available in our store.
With the Fluke T150, you'll get accurate, reliable measurements of voltage in several different ways. As the voltage rises, the LED indicators on the front of the tester will illuminate, it'll display an exact value on the built-in LCD screen and it'll also vibrate when under load (with the ability to use whichever measurement mode you like). Continuity testing is also performed quickly and easily and includes an integrated audible buzzer.
It's also packed with additional functions. Working in a quiet area? Turn off the audible feedback with a few simple presses. Need to jot down a reading? Tap the data hold function to temporarily freeze your current value on the screen. You can also check RCD wiring, check phase rotation and can work safely thanks to CAT IV 600V and CAT III 690V safety rating, plus regulation GS38 tip caps included as standard.
Fluke T150 Two-Pole Voltage/Continuity Tester Key Features
- 4 ways to detect AC/DC voltage - LED indicators, digital indicator, audible continuity and vibration feedback
- Backlit screen and indicators for use in poor lighting conditions
- Switch audible tone on/off for use in areas where quiet is necessary
- Low battery indicator
- Detects voltage even when the batteries are dead
- Improved probe docking system ensures probes can always be easily and safely stored
- Phase rotation indicator suitable for use on 3 phase systems
- RCD functionality - draw more current from the circuit to intentionally trip an RCD
- Display hold temporarily stores last value taken on screen
- Built-in electric torch
- Single-phase voltage for fast identification of live conductors
- Push-on probe tips
- Resistance testing up to 1999Ω
- WearGuard insulation shows damage to test leads
- CAT IV 600V and CAT III 690V safety rating
- GS38 compliant probe tips
Fluke T-Series Comparison Chart
The following table outlines the difference between each of Fluke's T-series Two-Pole Voltage and Continuity Testers:
T90 | T110 | T130 | T150 | |
Voltage AC/DC | 12V - 690V | 12V - 690V | 6V - 690V | 6V - 690V |
Continuity | 0-400kΩ | |||
Frequency | 0/40-400Hz | |||
Phase Rotation | - | 100V-690V | ||
Resistance Measurement | - | - | - | Up to 1999Ω |
Response Time (LED Indicator) | <0.5s | |||
200kΩ Input Impedance | Current Draw 3.5mA @ 690V Current Draw 1.15mA @ 230V |
|||
7kΩ Input Impedance (with load buttons pressed) | - | Current draw 30mA @ 230V | ||
Safety Rating | CAT II 690V CAT III 600V |
CAT III 690V CAT IV 600V |
||
IP Rating | IP54 | IP54 | IP64 | IP64 |
Backlit LED indicator | ✓ | ✓ | ✓ | ✓ |
Backlit LCD digital display | - | - | LCD | LCD |
Continuity test—visual results | ✓ | ✓ | ✓ | ✓ |
Continuity test—audible results | ✓ | ✓ with on/off | ✓ with on/off | ✓ with on/off |
Vibratory indicator under load | - | ✓ | ✓ | ✓ |
Display hold | - | - | ✓ | ✓ |
Voltage test | ✓ | ✓ | ✓ | ✓ |
Indication of polarity | ✓ | ✓ | ✓ | ✓ |
Resistance measurement | - | - | - | ✓ |
Switchable load | - | ✓ | ✓ | ✓ |
Single pole test for phase detection | ✓ | ✓ | ✓ | ✓ |
Rotary field indicator | - | ✓ | ✓ | ✓ |
Probe tip protection | ✓ | ✓ | ✓ | ✓ |
Voltage display with discharged batteries | ✓ | ✓ | ✓ | ✓ |
Electrical torch function | - | ✓ | ✓ | ✓ |
Wear indicator test lead wire | ✓ | ✓ | ✓ | ✓ |
- Free Pack of 4 Fluke GS38 Probe Caps - 4083642-PACK, typically £10.00
Fluke T150 Two-Pole Voltage and Continuity Tester Technical Specifications
Voltage AC/DC Range | 6V to 690V |
Continuity Range | 0 to 400kΩ |
Frequency Range | 0/40 to 400Hz |
Phase Rotation Range | 100 to 690V |
Resistance Range | Up to 1999Ω |
Response Time (LED Indicators) | <0.5s |
200kΩ Input Impedance | Current draw 3.5mA @ 690V Current draw 1.15mA @ 230V |
7Ω Input Impedance (with load buttons pressed) | Current draw 30mA @ 230V |
Safety Rating | CAT III 690V, CAT IV 600V |
IP Rating | IP64 |
Power Requirements | 2 x AAA batteries |
Net Weight | 280g (9.9oz) |
Size (L x W x H) | 23 x 7 x 3.8cm |
Warranty | 2 years |
Reviews
SKU | FLUKET150 |
---|---|
Manufacturer Part Code | 4016977 |
Country of Origin | United Kingdom |