Reward Points
:
10462
£10,462.80
£8,719.00
Fluke P3114 Oil Hydraulic Deadweight Tester
The Fluke P3114 Oil Hydraulic Deadweight Tester is available in four models with differing pressure ranges and measurement units. For further information regarding the differences between these models, please see the table below.
| Product Code | Product Name | Pressure Range |
| P3114-BAR | Fluke P3114-BAR Oil Hydraulic Deadweight Tester - 700 bar | 20 to 700 bar |
| P3114-KGCM2 | Fluke P3114-KGCM2 Oil Hydraulic Deadweight Tester - 700 kgf/cm2 | 20 to 700 kgf/cm |
| P3114-PSI | Fluke P3114-PSI Oil Hydraulic Deadweight Tester - 10k psi | 200 to 10 000 psi |
| P3114-MPA | Fluke P3114-MPA Oil Hydraulic Deadweight Tester - 70 MPa | 2 to 70 MPa |
The Fluke P3114 Oil Hydraulic Deadweight Tester can be used to calibrate pressure sensing instruments such as transducers, transmitters, gauges and pressure switches. For a quick introduction to this product, please view the following video.
Measuring Pressure with a Deadweight Tester
The Fluke P3114 Oil Hydraulic Deadweight Tester has been optimised for accuracy and ease-of-use. It features a test-station design with O-rings and is supplied with 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT or BSP female adaptors, removing the need for PTFE tape and/or wrenches when attaching additional instruments. Furthermore, the inclusion of adjustable feet and a mounted spirit level ensures that the deadweight tester can be set-up accurately even on rough terrain. Moreover, the addition of a removable lid ensures that the Fluke P3114 Oil Hydraulic Deadweight Tester can be transported safely between worksites.
Weight masses used with this tester can be stored in a robust case with secure, self-locking mechanism, again ensuring that these instruments can be safely and securely transported. Weight masses are constructed from series 3, non-magnetic, austenitic, stainless steel and are marked with the instruments serial number. They are also marked with nominal pressure values relative to high- or low-pressure pistons.
When hydraulic pressure is created using mineral oil and the high-quality screw press, which also facilitates fine pressure adjustments, the piston begins to rise in the cylinder. In order to balance this upward force, the accurately calibrated weight masses are added to the piston. The final pressure is then determined by adding together the relevant nominal values marked on each of the weight masses placed on the piston. For further information regarding this process, please see the video below.
P3100 Series Hydraulic Deadweight Tester - Video Demo
The Fluke P3114 Oil Hydraulic Deadweight Tester also includes an integrated hand-pump which can be used to both prime the system and accommodate large volume applications. Additionally, the reservoir is constructed of clear acrylic allowing the user to view the oil level and quality at all times, whilst the integrated drain plug facilitates the quick and easy draining of the oil post-calibration.
The piston and cylinder assembly with floatation indicator is constructed in accordance with the highest standards; as such, it features certified accuracies traceable to international standards laboratories, such as the National Institute of Standards and Technology (NIST). Indeed the Fluke P3114 Oil Hydraulic Deadweight Tester is supplied with a traceable certificate of accuracy. The design of the Fluke P3114 Oil Hydraulic Deadweight Tester works to minimise distortion and thermal coefficients whilst preserving the stability and durability of the tester.
The Fluke P3114 Oil Hydraulic Deadweight Tester has a standard accuracy of 0.015%. This accuracy can be improved to 0.008% via adjusting the set-up of the Fluke P3114 Oil Hydraulic Deadweight Tester. For instance, this instrument is calibrated to standard gravity (980.665cm/s²), however, it may be calibrated to the user’s local gravity, thereby accounting for the effect of this force on the weight masses and subsequently improving the accuracy of the instrument.
The Fluke P3114 Oil Hydraulic Deadweight Tester is an accurate, adaptable, easy-to-use instrument ideal for calibrating pressure sensing instruments via the creation of hydraulic pressure and the addition of accurately calibrated weight masses.
Fluke P3114 Oil Hydraulic Deadweight Tester Key Features
- Available in four models with varying pressure ranges and measurement units
- Can be used to calibrate pressure sensing instruments such as transducers, transmitters, gauges and pressure switches
- Test-station design with O-rings
- Supplied with 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT or BSP female adaptors
- PTFE tape and/or wrenches are not required when attaching additional instruments
- Adjustable feet
- Mounted spirit level
- Removable lid
- Weight masses can be stored in a robust weight box with a self-locking mechanism
- Weight masses are made from series 3, non-magnetic, austenitic, stainless steel
- Weight masses are marked with the instrument’s serial number and the nominal pressure values relative to high-or low-pressure pistons
- Creates hydraulic pressure using mineral oil
- High-quality screw press can be used to produce pressure and make fine pressure adjustments
- As hydraulic pressure is created the piston rises in the cylinder
- To balance this upward force weight masses are added to the piston
- To determine the final pressure the relevant nominal values inscribed on the weight masses added to the piston are combined
- Integrated hand-pump can be used to prime the system and accommodate large volume applications
- Clear, acrylic reservoir
- Integrated drain plug
- Piston and cylinder assembly with floatation indicator
- Piston and cylinder assembly is constructed in accordance with the highest standards
- Piston and cylinder assembly includes certified accuracies traceable to international standards laboratories (NIST)
- Supplied with a traceable certificate of accuracy
- Piston and cylinder assembly is designed to minimise distortion and thermal coefficients whilst maintaining stability and durability
- Standard accuracy of 0.015%
- Calibrated to standard gravity (980.665cm/s²)
- Standard accuracy can be improved to 0.008%
- The instrument may be calibrated to the user’s local gravity
- Accurate, adaptable, easy-to-use instrument
- Ideal for calibrating pressure sensing instruments via the creation of hydraulic pressure and the addition of accurately calibrated weight masses
What’s Included?
- Your Choice of Fluke P3114 Oil Hydraulic Deadweight Tester
- Traceable Certificate of Accuracy
- Weight Masses
- Removable Lid
- 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT or BSP female adaptors
- Spare Seals
- Operating Fluid (where applicable)
Fluke P3114 Oil Hydraulic Deadweight Tester Technical Specifications
| Accuracy | ±0.015% of reading (±0.008% optional) |
| *Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. | |
| Materials of Construction | |
| Standard weight material | Series 3 non-magnetic austenitic stainless steel |
| Weight density | 7.8 g/cm³ |
| Optional fractional weights | Solution heat treated aluminum |
| Weight density | 2.7 g/cm³ |
| Piston material | Tungsten carbide with nickel binder Density- 15.0 g/cm³ |
| Cylinder material | Hardened martensitic steel Tungsten carbide |
| Thermal coefficients of expansion | Oil piston/cylinder 16.5 ppm/°C |
| General Specifications | |
| Test port adaptors | 1/8, 1/4, 3/8 and ½ NPT or BSP |
| Instrument weight | 36 lbs (16 kg) |
| Instrument size | 17.5 W x 12 D x 8.5 H |
| Mass set weight (typical) | 80 lbs (36 kg) |
| Reservoir volume | 150 cc |
| Screw press displacement | 5.5 cc |
| Pump displacement | 4.7 cc per stroke |
| O-ring seal materials | Buna N as standard, Viton and EPDM available |
| Weight Increments | |
| Minimum Standard Weight Increments | Up to 500 psi (35 bar): 1 psi (0.1 bar) 500 to 5000 psi (35 to 350 bar): 10 psi (1 bar) 5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar) Model P3112: 1 psi (0.1 bar) |
| Optional Fractional Weights | Up to 500 psi (35 bar): 0.1 psi (0.01 bar) 500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar) 5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar) |
| Operating Fluid | |
| Mineral oil | Shell spindle oil 22, our reference 55-655, viscosity 40 cs@ 20°C |
People Also Bought
Reviews
Additional Information
| SKU | FLK-P3114 |
|---|---|
| Manufacturer Part Code | 4185041 |
