Fluke N5K 3PP54IP Norma 5000 Three Phase Power Analyser

Specifications

General

• Number of Phases Fluke Norma 4000: 1 to 3
• Weight Fluke Norma 4000: Approx. 5 kg (11 lb.)
• Size Fluke Norma 4000: 150 mm x 237 mm x 315 mm (5.9 in x 9.3 in x 12.4 in) 
• On-board Printer Fluke Norma 4000: 
• Display Color, 5.7“ / 144 mm - 320 x 240 pixel User-selectable background lighting and contrast.
• Bandwidth dc to 3MHz or dc to 10MHz depending on input module
• Basic Accuracy 0.2%, 0.1% or 0.03% depending on input modules
• Sampling Rate 0.33 MHz or 1 MHz depending on input modules
• Voltage Input Range 0.3 V to 1000 V
• Current Input Range (direct, not via shunt) 0.03 mA to 20 A depending on input module
• Memory for Configurations 4 MB
• Memory for Settings 0.5 MB
• Fast Fourier Transformation (FFT) To the 40th harmonic
• RS232/USB Interface Standard
• PI1 Process interface (8 analog/impulse inputs and 4 analog outputs) Optional
• IEEE 488.2/GPIB interface (1 MBit/s Ethernet / 10 MBit/s or 100 MBit/s) Optional
• Fluke NormaView PC software (for data download, analysis & report writing) Standard

Basic Functions

• Fast Fourier Transformation (FFT) Calculation of harmonics with graphical representation. Up to 3 bar graphs are displayed at the same time.
• Measured values: U, I, P per phase, order: 1st to 40th harmonics, maximum half sample frequency
• Digital Oscilloscope (DSO) Simultaneous display of up to 3 measured values on sample level. Quick view of curve form and distortion.
• Integration function (energy) Simultaneous display of up to 6 configurable numeric values. Start/Stop conditions and positive negative direction available.
• Vector Display Vector display of HO1 up to 6 signals. For easy testing of the right connection of the instrument and quick overview of the phase angle of each signal.
• Recorder Display of average values over time for trend determination.
• RAM data memory Storing of sample and average values; setting of start and stop conditions. From the RAM approximately 4 MB are available for the storage of measured values.
• Configuration Set up the analyzer to measure and display data in the format required.

Ambient Conditions

• Working Temperature Range 5 °C to 35 °C (41 °F to 95 °F)
• Storage Temperature Range -20 °C to 50 °C (-4 °F to 122 °F)
• Housing Material Fluke Norma Power Analyzers are extremely compact and equipped with a solid metal case to meet stringent EMC requirements.
• Climatic Class KYG DIN 40040, max. 85 % relative humidity, non-condensing.
• Power supply 85 V ac to 264 V ac, 50 Hz to 60 Hz, dc 100 to 260 V, ca. 40 VA European plug with switch. Binding post for current available on some models.
• Measuring Inputs Safety sockets 4 mm, 2 for each input. External shunt connection over BNC socket.
• Operation Membrane keyboard with cursor – function keys and direct functions.
• Connections Rear panel of the 3-phase Analyzer

Frequency and Synchronization

• Range DC and 0.2 Hz to sample rate
• Accuracy ±0.01 % of measured value (reading)

Standards and Safety

• Electrical Safety EN 61010-1 / 2nd Edition 1000 V CAT II (600V CAT III), Degree of pollution 2, safety Class I, EN 61558 for transformer, EN 61010-2-031/032 for accessories
• Maximum inputs For voltage inputs Measurement range 1000 Veff, 2 kVpeak, For current inputs Measurement range 10 Aeff, 20 Apeak
• Test voltage Net input case (protective conductor): 1.5 KV AC Net connection Measurement input: 5.4 kV AC Measurement inputs Case: 3.3 kV AC Measurement input input: 5.4 kV
• Electromagnetic susceptibility Emission: IEC 61326-1, EN 50081-1, EN 55011 Class B Immunity: IEC 61326-1 / Annex A (industrial sector), EN 50082-1

Power Phases

The Fluke Norma 4000 Power Analyzer can be equipped with up to three power phases and the Fluke Norma 5000 Power Analyzer can be equipped with up to six power phases. Users can select the power phase best suited for their application. Specifications vary depending on the model of the power phase. Each modular plug-in power phase consists of a voltage and a current measurement channel. Each measuring channel is available for each basic unit, however only one kind of channel can be used per unit. Check standard configurations.

Power Phase Channels

PP42 Accuracy: 0.2% (0.1% rd + 0.1 % rg) Current range: 20 A Sampling rate: 341 kHz Bandwidth: 3 MHz

PP50 Accuracy: 0.1% (0.05% rd + 0.05 % rg) Current range: 10 A Sampling rate: 1 MHz Bandwidth: 10 MHz

PP54 Accuracy: 0.1% (0.05% rd + 0.05 % rg) Current range: 10 A Sampling rate: 341 kHz Bandwidth: 3 MHz

PP64 Accuracy: 0.03% (0.02% rg + 0.01% rg) Current range: 10 A Sampling rate: 341 kHz Bandwidth: 3 MHz