Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Fluke i6000s flex-24 AC Current Clamp (6000 A)
- Flexible probe allows for tricky testing
- Works with oscilloscopes, digital multimeters and more
- Easy to operate
SKU
i6000s flex-24
MPN
2840311
Designed to work with oscilloscopes, digital multimeters, recorders or data loggers the Fluke I6000s flex-24 AC Current Clamp (also known as a current probe) allows you to effectively measure AC current up to 6000A.
The flex-24 isn't just a fancy name - instead the i6000s flex-24 allows you to perform tests in previously inaccessible areas using conventional clamp meters. How does it do this? Well the flexible nature of the device allows you to bend it into shapes that conventional meters just wouldn't be able to do, allowing the head of the device to be clamped onto to previously unreachable places and perform accurate current measurements.
So if you have an oscilloscope, a digital multimeter or various other devices and they aren't quite capable of reaching a tricky spot, you really can't go wrong with using the Fluke i6000s flex-24 AC current clamp to get to that pesky area that your tester just won't stretch to. With this handy accessory in tow you'll never have to worry about tricky workarounds again - simply attach, flex the head and start testing.
Offers
Buy a Fluke Get One Free (Spend £150+)
Spend £150+ (Ex VAT) on any qualified Fluke or Beha-Amprobe product(s) and claim a free tool of your choice from the list at Fluke Promotion. Valid February 17 2025 - July 31 2025.
Claims are made direct to Fluke. Terms and conditions apply.
Technical Information
Specification
Specifications
- Current Ranges 60 A / 600 A / 6000 A ACRMS
- Output Sensitivity (AC coupled) 50 mV /5mV / 0.5mV per A
- Load Impedance 100 kOhm minimum
- Accuracy (at +25°C) ±1% of range (45 – 65 Hz)
- Linearity (10% to 100% of range) ±0.2% of reading
- Noise 8mV ACRMS (60 A) 2 mV ACRMS (600/6000A)
- Frequency Range 10 Hz to 50 kHz (- 3 dB)
- Phase Error < ±1º (45 – 65Hz), ±10º (at 20 kHz)
- Position Sensitivity (with cable > 25mm from the coupling) ±2% of range
- External field (with cable > 200mm from the head) ±1% of range
- Power Supply 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply
- Temperature Coefficient ±0.08% of reading per C
- Working Voltage (see Safety Standards section) 600 V ACRMS or DC
- Head Cable length…(double insulated) 610mm (24”) I6000s Flex-24 915mm (36”) I6000s Flex-36
- Head Cable Diameter 14.3 mm
- Head Bend Radius 38.1 mm
- Cable length (head to electronics) 2 meters
- Output Connection 0.5 m cable terminated with safety BNC connector Supplied with 4mm safety plug adaptor
- Operating Temperature Range -20 to +90 °C (head) -20 to +85 °C (electronics)
- Storage Temperature Range -40 to +105 °C (head) -20 to +85 °C (electronics)
- Operating Humidity 15% to 85% (non condensing)
- Weight 180 g (head), 190 g (electronics)
- Safety Standards BS EN 61010 1: 2001 BS EN 61010 2-032: 2002 BS EN 61010 031: 2002, 600VRMS, Category III, Pollution Degree 2 Note Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies below 1 kHz.
- EMC Standards BS EN 61326: 1998 +A1, A2, & A3
Additional Information
SKU
i6000s flex-24
Manufacturer Part Code
2840311
Model Ref
i6000s flex-24
Fluke i6000s flex-24 AC Current Clamp (6000 A)
£799.00
£958.80 inc vat
£799.00
£958.80 inc vat