Reward Points
:
395
£474.00
£395.00
Fluke i310s AC/DC Current Clamp (300A)
The Fluke i310s is designed for use with oscilloscopes, multimeters and other testers that accept standard 4mm jacks in order to carry out measurements of current.
This current testing device can be used to measure current in both AC and DC up to 300A AC and 450A AC. All measurements are carried out with high degrees of accuracy.
Fluke's i310s is designed to be used with conductors up to 19mm in diameter.
Fluke i310s AC/DC Current Clamp (300A) Key Features
- Connects to oscilloscopes, multimeters etc to carry out current measurements
- 19mm diameter jaws
- Measures current to 300A AC and 450A DC
- 30 hour battery life
- 2m cable length
Specifications
- Current Ranges 30 A and 300 A ACRMS or ±45 A and 450 A DC
- ACRMS or DC ±45 A and 450 A
- Inrush Current 600A ACRMS MAX
- Output Sensitivity 10 mV/A (30 A) 1 mV/A (300 A)
- Accuracy (at +23°C) (30A range) ±1% of reading ±50 mA (300A range) ±1% of reading ±300 mA
- Bandwidth to meet accuracy specification 1 kHz
- Phase Shift below 1 kHz < 2 degrees
- Resolution ±50 mA (30 A) ±100 mA (300 A)
- Load Impedance > 10 k Ohms and ≤100 pF
- Conductor Position Sensitivity ±1.5% relative to centre reading
- Frequency Range (small signal) DC to 20 kHz (- 3 dB)
- Temperature Coefficient ±0.1% of reading / °C
- Power Supply 9 V Alkaline, MN1604/PP3
- Battery Life 30 Hours, low battery indicator
- Working Voltage (see Safety Standards section) 300 V ACRMS or DC
- Maximum Conductor Size 19 mm diameter
- Output Connection Safety BNC connector Supplied with safety 4mm adaptor
- Output Zero Manual adjust via thumbwheel
- Cable Length 2 metres
- Operating Temperature Range -10 to +50 °C
- Storage Temperature Range (with battery removed) -20 to +85 °C
- Operating Humidity 15% to 85% (non-condensing)
- Weight 250 g
Reviews
Additional Information
| SKU | i310s |
|---|---|
| Manufacturer Part Code | 2840309 |
| Model Ref | i310s |
| Country of Origin | China |
