Fluke i2000 flex AC Flexible Current Clamp (2000 A)

Specifications

• Current ranges 20 A 200 A 2000 A AC rms
• Output sensitivity (AC-coupled) 100 mV 10 mV 1 mV 1 mV per A
• Load impedance 100 kΩ minimum
• Accuracy at +25 °C ± 1 % of range (45 Hz to 65 Hz)
• Linearity 10 % to 100 % of range ± 0.2 % of reading
• Noise 8 mV ac rms (30 A) 2 mV ac rms (300 A, 3000 A)
• Frequency range 10 Hz to 20 kHz (-3 dB)
• Phase error < ± 1 º (45 Hz to 65 Hz) ± 10 º (at 20 kHz)
• Position sensitivity with cable > 25 mm from the coupling ± 2 % of range
• External field with cable > 200 mm from the head ± 1 % of range
• Power supply 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
• Temperature Coefficient ± 0.08% of reading per°C
• Working voltage see Safety standards section 600 V AC rms or DC
• Head Circumference 610 mm (24 in)
• Head cable diameter 14.3 mm (0.56 in)
• Head bend radius 38.1 mm (1.5 in)
• Cable length (head to electronics) 2 m (6.56 ft)
• Output connection Molded 4 mm safety plugs (not integrated)
• Operating temperature range 0 °C to +70 °C (32 °F to 158 °F) (head and electronics)
• Storage temperature range -40 °C to +105 °C (-40 °F to 221 °F) (head) -20 °C to +85 °C (-4 °F to 185 °F) (electronics)
• Operating humidity 15 % to 85 % (non-condensing) Weight 180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics)
• Safety standards EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
• EMC standards EN 61326: 1998 +A1, A2, & A3
• Dimensions HxWxD 116 mm x 68.5 mm x 30 mm (4.56 in x 2.69 in x 1.18 in)