Reward Points
:
1289
£1,546.80
£1,289.00
Free UK Delivery*
Fluke FEV300/KIT UK Fluke 1663MFT + Test Adaptor EV Charging w/Type 2 Plug
Description
Check the safety and functionality of electric vehicle charging stations using the Fluke 1663 Multifunction Tester & FEV300 EV Charging Test Adapter Kit. This kit includes:
- Fluke 1663 Multifunction Tester
- Fluke FEV300 EV Charging Test Adapter with a Type 2 Plug
Buy now, only available until the 31st December 2024!
Fluke 1663 Multifunction Tester Overview
The Fluke 1663 Multifunction Tester is ideal for testing the safety of electrical installations in domestic, commercial, and industrial environments, as well as verifying the correct installation of fixed wiring.
New EVSE Testing Capability
The Fluke 1663 Multifunction Tester’s firmware has been updated to support 6mA RDC-DD tests by international standards IEC 60964 and IEC 62752. Together with Fluke’s FEV300 Test Adapter, this new ability enables comprehensive, accurate, and reliable testing of electric vehicle supply equipment (EVSE). It allows you to conduct all necessary tests in one go and meet the evolving needs of the EVSE market.
The Fluke 1663 Multifunction Tester can check:
- NEW 6mA RCD-DD tests according to IEC 60964 and IEC 62752
- Insulation Resistance
- Loop Resistance
- Line Resistance
- Earth Resistance
- Continuity
- 10mA continuity for measuring motor windings
- RCD variable current
- RCD switching time and tripping level (Ramp Test)
- RCD type A & AC trip times and currents (Combined test)
- Type B/B+ RCD (smooth DC sensitive)
- Wiring polarity: detect broken N and PE wires
- True-RMS AC/DC voltage: fast measurement between L-N, L-PE, and N-PE using the mains cord (no need to change connections)
- Prospective earth fault current (PEFC/IK)
- Prospective short-circuit current (PSC/IK)
- Phase sequence (with phase sequence indicator)
The Fluke 1663 Multifunction Tester also features an Auto Test function, ring testing, High-current Loop mode, Pre-test function, earth volt touchpad, and a zero adapter. A rotary dial makes it easy to select the required function or test.
Readings are indicated on the large, backlit display. They may be saved to the Fluke 1663 Multifunction Tester’s three-layer memory from where they can be downloaded onto a PC and organised using Fluke’s TruTest Advanced Software. Alternatively, data may be wirelessly transferred to a smartphone/tablet via the Fluke Connect App.
For further information regarding the Fluke 1663 Multifunction Tester, please follow this link.
Fluke FEV300 EV Charging Test Adapter with Type-2 Plug Overview
When used with the Fluke 1663 Multifunction Tester, the Fluke FEV300 EV Charging Test Adapter with Type-2 Plug can be used to test the functionality and safety of electric vehicle charging stations with AC charging mode 3. It simulates an electric vehicle or charging cable to conduct the tests below and induce the following states:
- PE Pre-Test
- Proximity Pilot (PP) State
- Control Pilot (CP) State
- Phase Indication test
L1, L2, L3, N, and PE measuring terminals enable connections to Fluke measurement instruments while terminals for CP signal outputs allow you to check the communication between the adapter (simulating an EV) and the charging station.
IP54-rated and compliant with IEC/EN 61851-1 and IEC/HD 60364-7-222, the Fluke FEV300 EV Charging Test Adapter enables accurate, reliable, and comprehensive testing of EV charging stations.
Please follow this link for more information about the Fluke FEV300 EV Charging Test Adapter.
What’s Included?
- Fluke 1663 Multifunction Tester
- 6x AA (IEC LR6) Cell Batteries
- Zero Adapter
- Heavy Duty Mains Cord
- Standard Test Lead Set
- Fluke TP165X Remote Control Probe and Lead
- Padded Carrying and Waist Strap
- Fluke C1600 Hard Carrying Case
- Quick Reference Guide
- Fluke FEV300 EV Charging Test Adapter
- Fluke FEV300-CON-TY2 Type-2 Plug
- Soft Carrying Bag
Offers
Free Electrician's Accessory
- 50M R2 Extension Wander Test Lead (PVC Cable Reel) - TSTL50M, typically £49.00
- Lockout Starter Kit - Incl. Hasps, Padlocks, Tags, MCB Lockout & More - LT-LPP, typically £25.00
- TestSafe Fibreglass Fish Tape Cable Puller – 30m - TS-FG-FT-30M, typically £24.99
- Evik 10 Piece Cable Pulling Fibreglass Rods, Standard Kit in Tube - EV-STD-KIT-T, typically £39.00
Tech Specs
Fluke 1600 Series Technical Specifications
| AC/DC Voltage (TRMS) | ||||
|---|---|---|---|---|
| Range | Resolution | Input Impedance | Overload Protection | |
| 500V | 0.1V | 3.3MΩ | 660V rms | |
| Continuity Testing (Rlo) | ||||
| Range (Autoranging) | Resolution | Open Circuit Voltage | ||
| 20Ω | 0.01Ω | >4V | ||
| 200Ω | 0.1Ω | |||
| 2000Ω | 1Ω | |||
| Insulation Resistance Measurement (Riso) | ||||
| Model Number | Test Voltages | |||
| 1662 | 100, 250, 500 and 1000V | |||
| 1663/1664 FC | 50, 100, 250, 500 and 1000V | |||
| Test Voltage | Insulation Resistance Range | Resolution | Test Current | |
| 50V | 20MΩ/50MΩ | 0.01MΩ/0.1MΩ | 1mA @ 50kΩ | |
| 100V |
20MΩ/100MΩ |
0.01MΩ/0.1MΩ | 1mA @ 100kΩ | |
| 250V | 20MΩ/200MΩ | 0.01MΩ/0.1MΩ | 1mA @ 250kΩ | |
| 500V | 20MΩ/200MΩ/500MΩ | 0.01MΩ/0.1MΩ/1MΩ | 1mA @ 500kΩ | |
| 1000V | 20MΩ/200MΩ/1000MΩ | 0.01MΩ/0.1MΩ/1MΩ | 1mA @ 1MΩ | |
| Insulation Pretest | ||||
| Insulation Safety Pretest | Requires the unit to be connected to L, N and PE | |||
| Loop and Line Impedance (Zi) | ||||
| Range | Resolution | |||
| 10Ω (Hi current mΩ mode) 20Ω/200Ω/2000Ω | 1mΩ / 0.01Ω / 0.1Ω / 1Ω | |||
| RCD Testing | ||||
| Model Number | Types Tested | |||
| 1662 | AC, G, S, A/F | |||
| 1663/1664 FC | A/F, AC, B/B+, G and S | |||
| RCD Trip Time Test (ΔT) | ||||
| Current Range | Step Size | Dwell Time | Measurement Accuracy | |
| Type G | Type S | |||
| 30 to 110% of RCD Rated Current | 10% of index IΔN | 300ms/step | 500ms/step | ±5% |
| Notes 30 % to 210 % for Type A IΔN = 10mA 20 % to 210 % for Type B |
Specified trip current ranges (EN 61008-1): 50 % to 100 % for Type AC 35 % to 140 % for Type A (>10 mA) 35 % to 200 % for Type A (≤10 mA) 50 % to 200 % for Type B |
|||
| Earth Resistance Test (RE) - Only Available On 1664 FC and 1663 | ||||
| Range | Resolution | Frequency | Output Voltage | |
| 200Ω | 0.1Ω | 128Hz | 25V | |
| 2000Ω | 1Ω | 128Hz | 25V | |
| Phase Sequence Indication | ||||
| Icon | Range | Display | ||
| Shows icon when active | 100 to 500V | 1-2-3 or 3-2-1 | ||
| General Specifications | ||||
| Dimensions | 10cm (L) x 25cm (W) x 12.5cm (H) | |||
| Weight (Including Batteries) | Approx 1.3kg | |||
| Battery Size | 1.5V type AA (IEC LR6) x 6 | |||
| Sealing | IP40 | |||
| Safety | Complies with IEC/EN61010-1, UL61010, ANSI/ISA - s82.02.01 and CAN/CSA c22.2 No. 1010 | |||
| Overvoltage | CAT III 500V, CAT IV 300V | |||
| Performance | EC/EN61557-1 to IEC/EN61557-7 and IEC/EN61557-10 | |||
Fluke FEV300 EV Charging Test Adapter Technical Specifications
| General Features | |
| Input voltage | Up to 250 V (single phase system) / up to 480 V (three phase system), 50/60 Hz, max 10 A |
| Internal power consumption | 3 W max |
| FEV300-CON-TY2 Plug | AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase) |
| FEV300-CON-TY1 Plug | AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1, 5P single-phase) |
| Dimensions (H × W × D) | 110 × 45 × 220 mm length without connection cable and test cable |
| Weight (including type 1 or type 2 connection cable) |
Approx. 1 kg |
| Safety standards | IEC/EN 61010-1, pollution degree 2 IEC/EN 61010-2-030, CAT II 300 V, protection class II |
| Ingress protection | IEC 60529: IP54 (housing) IEC 60529: IP54 (measuring terminals with protection caps in place, connector/ plug in connected condition or with protection caps in place, otherwise IP20) |
| Operating temperature | -20 °C to 40 °C |
| Storage temperature | -20 °C to 50 °C |
| Operating humidity range | 10 % to 85 % relative humidity non-condensing |
| Storage relative humidity | 0 % to 85 % non-condensing |
| Operating altitude | 2000 m max. |
| Functions | |
| PE Pre-Test | Visible indication >50 V AC/DC between PE conductor and touch sensor |
| PP Simulation | Open, 13 A, 20 A, 32 A, 63 A |
| CP States | State A, B, C, D |
| CP Error state “E” | On/off (CP signal short-circuited to PE) |
| PE Error state "F" (Earth fault) | On/off (interruption of PE conductor) |
| Outputs (for test purpose only) | |
| Measuring terminals L1, L2, L3, N, PE | Max. 250/480 V, max. 10 A |
| CP signal output terminals | Approx. +/-12 V |
Reviews
Additional Information
| SKU | 5588456 |
|---|---|
| Manufacturer Part Code | 5588456 |
| Country of Origin | Slovenia |
