Environmental Accessories

• 50 spare pins for ETI's moisture probe
• Ideal for replacing your pins as they become damaged
• Easy to fit

• Calibration solution available in four concentrations
• Each concentration is optimised for use with a particular ETI TDS Conductivity Tester
• Supplied in 90ml bottles

• Verify the functionality of pin sensors contained on Protimeter’s pin-type moisture meters
• Readings between 17% and 19% indicate that the pins are still functional
• Includes two spare 1-inch needles

• Use with compatible pin moisture meters
• Optimised for measuring the moisture levels of hard-to-access places
• Consists of a 2-pin moisture probe, a lead, and a jack plug connector

• Remove mini hygrosticks from humidity sleeves
• Ideal for when in-situ moisture measurements of concrete slabs have been concluded

• Facilitates a connection between the Protimeter Mini Hygrostick and MMS2 Moisture Meter
• This connection allows the user to measure the equilibrium relative humidity and temperature of concrete floors
• Required in order to expand the Protimeter MMS2 Moisture Meter’s scope-for-use

• 2 inch length
• Compatible with FLIR moisture probes
• Easy to install

Extend your reach and measure ceilings and other hard to reach areas with this telescoping handle. For use with the Extech MO270 Moisture Meter or any other meter/probe with a tripod mount.

• A replacement handle and removal tool for the Protimeter BLD5055 Heavy Duty Hammer Electrode
• Features an all-metal design
• The BLD5055 Electrode can be used with Protimeter’s pin-type moisture meters to take sub-surface moisture readings

• Compatible with the Protimeter MMS, MMS2 and Hygromaster
• Use to measure the surface relative humidity of concrete floors and wall slabs
• The hygrostick (connected to a Protimeter meter) is placed in the box’s cavity 

• A set of two 100mm-long, insulated needles for the BLD5070 EIFS Probe
• Will only take measurements at the tip of the probe facilitating profile measurements
• Ideal for conducting measurements of exterior insulation finishing systems

• Connects a hygrostick sensor to a Protimeter MMS or Hygromaster
• 800mm in length
• Use to take in-situ relative humidity measurements of building materials such as concrete

• A replacement cable for the Protimeter BLD5055 Heavy Duty Hammer Electrode

• Replacement probe for the ETI 7000 moisture meter
• Sharp pins for insertion into materials
• 1m PVC lead with BNC connector

• Compatible with any Protimeter pin moisture meter
• Use with a compatible meter to measure moisture in awkward corners and other hard-to-access places
• Rugged design

• Tablet accessory pack for the Extech CL500 chlorine meter
• Includes 10 x free chlorine and 10 x total chlorine tablets
• Direct replacement for DPD powder tablets included with the CL500

• 4 inch length
• Suitable for use with FLIR MR optional probes
• Easy to install

• Use with the TPI DC580 Airflow Meter to measure air velocity and flow
• Measurement range: 0.4m/s to 25 m/s (80 fpm to 4900 fpm)
• Ideal for conducting measurements at various openings including registers and hoods

• Available in three lengths:  5-inches (127mm), 9-inches (240mm), and 14-inches (360mm)
• Measure the moisture content of walls and other structures and materials at greater depths
• Ideal for extending the measurement capabilities of compatible pin-type moisture meters

• Official replacement electrode for Extech PH90 meter
• Non-glass design resists breaking and clogging
• Suitable for use in many different applications

• Optimised for use with the Protimeter BLD5000 Hammer Electrode - Standard Design
• Pack of ten
• Non-threaded design

• Compatible with Protimeter’s MMS and MMS2 Moisture Meters
• Compatible with Protimeter’s Hygromaster Thermo-Hygrometer
• Measure the relative humidity of building materials such as concrete floors

• Use with TPI’s DC580 Airflow Meter to measure air flow and velocity in ducts
• Sensor shaft extends like an antenna facilitating access to difficult-to-reach places
• Air flow and velocity range:  0.2 m/s to 20m/s (40 fpm to 3900 fpm)

• Replacement moisture probes for FLIR MR moisture probes
• 6 inch length
• Hardened steel design, resistant to bending