Fluke 9102S HDRC Handheld Dry-Well Tester

The Fluke 9102S HDRC Handheld Dry-Well Tester can be used to perform temperature calibrations of dial gauges, digital thermometers, bulb switches and a range of sensors. Its extensive temperature range, -10°C to 122°C, makes it suitable for conducting below ambient calibrations.

It features two wells, both of which are 12.7mm (1/2”) in diameter and include removable inserts for various sensor sizes. This design means the Fluke 9102S HDRC Handheld Dry-Well Tester can accommodate both a reference thermometer and the instrument- or sensor-under-investigation.

The Fluke 9102S HDRC Handheld Dry-Well Tester is able to reach 0°C from ambient or 100°C from ambient in approximately ten minutes, achieving a stability of ±0.05°C in seven minutes.

In addition to this, the Fluke 9102S HDRC Handheld Dry-Well Tester has a display accuracy of ±0.25°C and is supplied with a NIST-traceable calibration.

As well as this instrument’s accuracy, reliability and versatility, the Fluke 9102S HDRC Handheld Dry-Well Tester has been designed with practicality in mind. To this end, it is only four inches high and six inches wide; its compact size makes it easy to transport between work sites.

Further to this, the Fluke 9102S HDRC Handheld Dry-Well Tester is supplied with an RS-232 interface and Fluke’s Interface-It Software, allowing the user to log results, as well as access and alter the Fluke 9102S HDRC Handheld Dry-Well Tester’s features, functions and set-up, remotely.

The Fluke 9102S HDRC Handheld Dry-Well Tester is an adaptable, compact temperature calibrator that does not compromise on accuracy, reliability or versatility.

Fluke 9102S HDRC Handheld Dry-Well Tester Key Features

• Perform temperature calibrations of dial gauges, digital thermometers, bulb switches and a range of sensors
• Extensive temperature range: -10°C to 122°C
• Suitable for performing below ambient calibrations
• Features two wells both of which are 12.7mm (1/2”) in diameter
• Each well includes removable inserts for accommodating various sensor sizes
• Two well design means the instrument can accommodate a reference thermometer and a device-under-test
• Ambient to 0°C in 10 minutes
• Ambient to 100°C in 10 minutes
• Stability: ±0.05°C
• Achieves stability in 7 minutes
• Display accuracy: ±0.25°C
• Supplied with a NIST-traceable calibration
• Compact: 4-inches high and 6-inches wide
• Supplied with an RS-232 interface and Fluke’s Interface-It Software
• Interface-It Software can be used to log measurements and operate the tester remotely
• An adaptable, compact temperature calibrator that does not compromise on accuracy, reliability or versatility

What’s Included?

• Fluke 9102S HDRC Handheld Dry-Well Tester
• 1/4-inch Insert
• 3/16-inch Insert
• RS-232 Interface
• Fluke Interface-It Software