Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Fluke 80i-110s AC/DC Current Clamp (100 A)
- High noise immunity
- 600 V rms rating
- Measurements from 50 mA to 100 mA
SKU
FLUCMA1
MPN
114519
Compatible with any Fluke voltage measuring device, the 80i-110s AC/DC current clamp is the ideal tool for troubleshooting electric, electronic, and automotive circuits. With safety at the forefront of design, the Fluke 80i-110s AC/DC current clamp features a 600 V rms rating, output cable and BNC connector to enhance user protection.
When used with Fluke ScopeMeter® test tools, the Fluke 80i-110s can analyse distorted waveforms and reproduce current waveforms as they occur from computers, motor drives, and electronic ballasts for fluorescent lighting. For an accurate picture of the situation, the Fluke 80i-110s performs like no other; measurements range from 50 mA – 100 mA with high fidelity millivolt output. Useful measurements can be taken from as low as 10 mA.
Key Features:
- Compatible with Fluke ScopeMeter® test tool, power harmonics analyser, oscilloscope, multimeter and other measurement devices
- Safe and accurate measurements for a wide range of electrical and electronic applications
- Enhances work safety in industrial and commercial power distribution systems
- High noise immunity
- 600 V rms rating
- Output cable and BNC connector
- 40-55 hours serviceable battery life
- Accurately reproduces current waveforms
- Accurately analyses distorted waveforms
- Measurements from 50 mA to 100 mA
- Narrow jaw for use in tight locations
- Green LED indicator when battery voltage is below 6.5V
- Operating temperature: 0 °C to 50 °C (32 °F to 122 °F)
Technical Information
Specification
Specifications
- Nominal current range 10 A, AC/DC 100 A, AC/DC
- Continuous current range 0.1 A - 10 A AC/DC 1 A - 100 A AC/DC
- Maximum Non-Destructive Current 140 A - 2 kHz
- Lowest measurable current 0.1 A
- Basic Accuracy 3% + 50 mA (@ 10 A) (% reading + floorspec)
- Useable frequency DC - 100 kHz
- Output level(s) 100 mV/A 10 mV/A
- Zero error adjustment Yes
- Safety Specifications Safety CAT II, 600 V CAT III, 300 V
- Maximum voltage 600 V
- Battery Life 9 V, 55 h
- Maximum conductor diameter 11.8 mm
- Output cable length 1.6 m
- BNC Adapter Yes
Additional Information
SKU
FLUCMA1
Manufacturer Part Code
114519
Model Ref
80i-110s
Fluke 80i-110s AC/DC Current Clamp (100 A)
£1,001.00
£1,201.20 inc vat
£1,001.00
£1,201.20 inc vat