Reward Points
:
2499
£2,998.80
£2,499.00
Free UK Delivery*
Fluke 805 FC/805 ES Vibration Tester Package
Fluke 805 FC Vibration Meter
Confidently make maintenance decisions with the Fluke 805 FC Vibration Meter, the most dependable tool for frontline mechanical troubleshooting teams. It provides consistent, severity-scaled readings of overall vibration, bearing condition, and machine health, ensuring reliable vibration screening.
Managing your vibration screening workflow is now more efficient with the Fluke Connect Mobile App. The app's integrated machine profile functionality allows you to set up profiles and push them directly to your 805 FC Vibration Meter. Users can utilize these profiles to create work orders and develop route-based maintenance schedules, which can be dynamically sent to field technicians, ensuring critical assets receive the necessary attention. Once a machine is tested, the 805 FC sends the results to the app, associating them with the correct profile and route. This data can be easily shared among teams, facilitating better maintenance decisions.
Fluke 805 FC Vibration Meter Key Features
- Innovative sensor design
- Consistent data quality
- Severity scale
- Overall Vibration measurement from 10Hz to n1000Hz
- Colour-coded pressure system
- CrestFactor+ technology
- On-board memory storage for up to 3,500 measurements
- External Accelerometer support
- Compare vibration experience
- Built-in torch
- Quality viewing experience
- Perform, temperature measurements with a spot IR sensor
- Reliable, repeatable, accurate device for checking bearings and overall vibration
- Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
- Provides consistent data quality at both low and high-frequency ranges
- Offers a four-level severity scale to assess the urgency of problems and bearing condition
- Allows you to export data via USB or wirelessly, through the Fluke Connect® mobile app
- Compatible with Fluke Connect® Mobile App that can transmit measurements to your smartphone to be shared in real time
- Enables you to get authorization to take the next steps in an instant if machine health is at risk via the Fluke Connect™ mobile app*
- Allows you to view trending in Microsoft® Excel using pre-built templates
- Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
- Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Compares vibration levels with ISO-10816 severity scales and stores results to the Fluke Connect Cloud
- Features coloured lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
- Measures temperature with Spot IR Sensor to increase diagnostic capabilities
- Holds and saves up to 3,500 measurements in on-board memory
- External accelerometer (optional) support for hard-to-reach locations
- Features built-in flashlight for viewing measurement locations in dark areas
- It provides a large high-resolution display for easy navigation and viewing
Fluke 805ES External Vibration Sensor
The Fluke 805ES is an external vibration sensor designed for scenarios where using the onboard sensor tip of the 805 Vibration Meter is challenging or impractical. It enables measurements in confined or hard-to-access areas, such as behind machine guards, within enclosures, or in locations that are difficult to reach and require more pressure than the 805 Vibration Meter can provide.
Fluke 805ES External Vibration Sensor Key Features
- 90° sensor body which allows the sensor to get into tight spots
- Rugged, coiled cable which minimises dangling, and can stretch to more than 7ft if needed
- U-shaped magnet mount which creates a firm connection to all surfaces
- Rugged cable connector to reduce wear and tear
- Detachable sensor magnet which allows for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
- Directly connects to the 805 Vibration Meter with an SMB connector located at the heel of the meter
What's Included?
- Fluke 805 FC Vibration Meter
- Fluke 805ES External Vibration Sensor
- USB Cable
- Storage Case
- Belt Holster
- Quick Reference Guide
- CD-ROM (Includes MS Excel Template and Documentation)
- 2 x AA Batteries
Videos
What does the Fluke 805 FC Vibration Meter measure?
What does the Fluke 805FC Vibration Meter measure?
How to operate the Fluke 805 FC Vibration Meter
How to operate the Fluke 805FC Vibration Meter
How to use the menu navigation of the Fluke 805 FC Vibration Meter
How to use the menu navigation of the Fluke 805FC Vibration Meter
Fluke 805 FC Vibration Meter
| Low-Frequency Range (Overall Measurement) | 10 Hz to 1,000 Hz |
|---|---|
| High Frequency Range (CF+ Measurement) | 4,000 Hz to 20,000 Hz |
| Severity Levels | Good, satisfactory, unsatisfactory, unacceptable |
| Vibration Limit | 50 g peak (100 g peak-peak) |
| A/D Converter | 16-bit |
| Signal-to-Noise Ratio | 80 dB |
| Sampling Rate | Low frequency: 20,000 Hz High frequency: 80,000 Hz |
| Real Time Clock Backup | Coin battery |
| Sensor | |
| Sensitivity | 100 mV g ± 10% |
| Measurement Range | 0.01 g to 50 g |
| Low-Frequency Range (Overall Measurement) | 10 Hz to 1,000 Hz |
| High-Frequency Range | 4,000 Hz to 20,000 Hz |
| Resolution | 0.01 g |
| Accuracy | At 100 Hz ± 5% of the measured value |
| Amplitude Units | |
| Acceleration | g, m/sec² |
| Velocity | in/sec, mm/sec |
| Displacement | mils, mm |
| Infrared Thermometer (Temperature Measurement) | |
| Range | -20 °C to 200 °C (-4 °F to 392 °F) |
| Accuracy | ±2 °C (4 °F) |
| Focal Length | Fixed, at ~3.8 cm (1.5") |
| External Sensor | |
| Frequency Range | 10 Hz to 1,000 Hz |
| Bias Voltage (to Supply Power) | 20 V dc to 22 V dc |
| Bias Current (to Supply Power) | Maximum 5 mA |
| Firmware | |
| External Interfaces | USB 2.0 (full speed) communication |
| Data Capacity | Database on internal flash memory |
| Upgrade | Through USB |
| Memory | Up to 3,500 measurements |
| Radiated Emission | |
| Electrostatic Discharge: Burst | Standard EN 61000-4-2 |
| Electromagnetic Interference | Standard EN 61000-4-3 |
| RE | Standard CISPR 11, Class A |
| Environmental | |
| Operating Temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
| Storage Temperature | -30 °C to 80 °C (-22 °F to 176 °F) |
| Operating Humidity | 10% to 95% RH (non-condensing) |
| Operating/Storage Altitude | Sea level to 3,048 meters (10,000 feet) |
| IP Rating | IP54 |
| Vibration Limit | 500g peak |
| Drop Test | 1 meter |
| General Specifications | |
| Battery Type | AA (2) Lithium Iron Disulfide |
| Battery Life | 250 measurements |
| Size (L x W x H) | 24.1 cm x 7.1 cm x 5.8 cm (9.5 in x 2.8 in x 2.3 in) |
| Weight | 0.40 kg (0.89 lb) |
| Connectors | USB mini-B 7-pin, external sensor jack (SMB connector) |
Fluke 805ES External Vibration Sensor
| Performance | |
|---|---|
| Measurement Range | 7 g pk (68.7 m/s² pk) |
| Frequency Range | 0 to 6000 CPM (0 to 100 Hz) |
| Relay | 3A Form C 480 VAC |
| Relay (Contacts) (DPDT) | Normally open / closed |
| >Environmental | |
| Temperature Range (Operating) | -13 to 140°F (-25 to 60°C) |
| Enclosure Rating | IP66 |
| Physical | |
| Size (Width x Height x Depth) | 4.35 x 3.30 x 4.35 in (110.5 x 83.8 x 110.5 mm) |
| Weight | 2.5 lb (1.134 kg) |
| Sensing Element | Magnet |
| Housing Material | Aluminium alloy |
| Electrical Connector | Screw terminals |
| Screw Terminal Wire Size | 24-14 AWG (0.2 - 2.5 mm²) |
| Cable Input | 3/4-14 NPT |
| Mounting Hole Size | 0.25 in (6.4 mm) |
| Sensing Geometry | Inertial element |
Reviews
Additional Information
| SKU | 4918373 |
|---|---|
| Manufacturer Part Code | 4918373 |
