Reward Points
:
6660
£7,992.00
£6,660.00
Fluke 7526A Precision Process Calibrator
The Fluke 7526A Precision Process Calibrator can be used to calibrate the following components:
- RTD and thermocouple readouts
- Pressure gauges
- Temperature transmitters
- Digital process simulators
- Data loggers
- Multimeters
The Fluke 7526A Precision Process Calibrator is able to calibrate the above modules and instruments as a result of its extensive capabilities. It is able to simulate and measure nine types of RTDs and thirteen types of thermocouples. In addition to this, it can source between 0 and 100V of DC voltage and is able to measure DC voltage between 0 and 100V to an accuracy of 0.004% of the reading. Furthermore, this instrument can source 0 to 100mA of DC current and can measure DC current between 0 and 50mA to an accuracy of 0.01%. Adding to its sourcing capabilities is its ability to issue a 24V DC loop power supply, whilst its ability to measure 4-20mA loop current extends its measurement capabilities.
As well as the above, the Fluke 7526A Precision Process Calibrator can be used with Fluke’s 700 or 525A-P Pressure Modules in order to measure pressure to within 0.008% of the determined pressure value. The Fluke 7526A Precision Process Calibrator also accepts ITS-90 coefficients allowing it to take accurate SPRT (Standard Platinum Resistance Thermometers) measurements.
This instrument is also compatible with Fluke's MET/CAL® Software (NOT included) which allows the user to monitor measurements and reports, as well as conduct automated calibration procedures.
In addition to conducting automated calibration procedures using the MET/CAL® Software, the Fluke 7526A Precision Process Calibrator also includes an automated switch-test function.
In order to facilitate all the Fluke 7526A Precision Process Calibrator’s measurement capabilities, it includes a number of physical features, including:
- Isolated pressure module input: automatically detects the type and value of the Fluke 700 Pressure Module connected
- DC voltage, current and switch-test input and 24V DC power supply
- Thermocouple input and output terminal
- Two-wire RTD/Ω output terminal
- Four-wire RTD/Ω input terminals
- Isolated input controls: HART key activates a 250Ω loop resistor facilitating the HART device's ability to read a digital HART signal superimposed onto the 4-20mA loop current
- Primary input and output controls
- Cursor controls
This conveniently designed pressure calibrator is ideal for the benchtop calibration of a variety of temperature and process pressure equipment. The Fluke 7526A Precision Process Calibrator is a versatile, accurate, ergonomic and cost-effective instrument.
Fluke 7526A Precision Process Calibrator Key Features
- Ideal for calibrating a wide variety of temperature and pressure equipment
- Suitable for calibrating RTDs, thermocouple readouts, pressure gauges, temperature transmitters, digital process simulators, data loggers and multimeters
- Simulate and measure 9 types of RTDs
- Simulate and measure 13 types of thermocouples
- Source and measure 0 to 100V DC
- Measure DC voltage to an accuracy of 0.004% of the reading
- Source 0mA to 100mA DC current
- Measure DC current between 0 and 50mA to an accuracy of 0.01%
- Issue 24VDC loop power supply
- Measure 4-20mA loop current
- Use with Fluke’s 700 or 525A-P Pressure Modules to measure pressure to an accuracy of 0.008% of the reading
- Accepts ITS-90 coefficients for accurate SPRT measurements
- Compatible with Fluke’s MET/CAL® Software (NOT included)
- Automated switch-test function
- Isolated pressure module input: automatically detects the type and value of the Fluke 700 Pressure Module connected
- DC voltage, current and switch-test input and 24V DC power supply
- Thermocouple input and output terminal
- Two-wire RTD/Ω output terminal
- Four-wire RTD/Ω input terminals
- Isolated input controls: HART key activates a 250Ω loop resistor facilitating the HART device's ability to read a digital HART signal superimposed onto the 4-20mA loop current
- Primary input and output controls
- Cursor controls
- Ideal for benchtop calibration
- Versatile, accurate, ergonomic and cost-effective
What’s Included?
- Fluke 7526A Precision Process Calibrator
- Traceable Calibration Report
- User Manual CD
- Getting Started Guide
- Power Cord
- Thermocouple Shorting Jumper
- USB-to-Serial Adapter Cable
Fluke 7526A Precision Process Calibrator Technical Specifications
Temperature Range (°C)
Absolute Uncertainty,
tcal ±5 °C, ± (°C), 1-yr
| DC Voltage Output | |||
| Range [1] | Absolute Uncertainty, ± (ppm of output + μV), 1-yr |
Resolution | |
| 0 to 100 mV | 30 | 3 | 1 μV |
| 0 to 1 V | 30 | 10 | 10 μV |
| 0 to 10 V | 30 | 100 | 100 μV |
| 0 to 100 V | 30 | 1 mV | 1 mV |
| TC Output and Input | |||
| –10 mV to 75 mV | 30 | 2 μV | 1 μV |
| [1] All outputs are positive only unless otherwise noted | |||
| DC voltage, isolated input | |||
| Range | Absolute Uncertainty, ± (ppm of reading + mV), 1-yr |
Resolution | |
| 0 to 10 V | 50 | 0.2 | 100 μV |
| 10 V to 100 V | 50 | 2.0 | 1 mV |
| DC Current, output | |||
| Range[1] | Absolute Uncertainty, ± (ppm of reading + μA), 1-yr |
Resolution | |
| 0 to 100 mA | 50 | 1 | 1 μA |
| [1] For line voltages less than 95 V, ±100 ppm of reading | |||
| DC current, isolated input | |||
| Range | Absolute Uncertainty, ± (ppm of reading + μA), 1-yr |
Resolution | |
| 0 mA to 50 mA | 100 | 1 | 0.1 μA |
| 0 mA to 24 mA [1][2] (Loop Power) |
100 | 1 | 0.1 μA |
| [1] Loop Power: 24 V ±10% [2] HART Resistor: 250 Ω ± 3% |
|||
| Resistance, output | |||
| Range | Absolute Uncertainty, ± (ppm of reading + Ω), 1-yr |
Resolution | |
| 0 Ω to 400 Ω | 20 | 0.004 | 0.001 Ω |
| 0 Ω to 4 kΩ | 20 | 0.04 | 0.01 Ω |
| Sample thermocouple accuracy, input/output (does not include all available TC types)[1] |
|||
| TC type | Temperature Range (°C) | Absolute Uncertainty, tcal ±5 °C, ± (°C), 1-yr [2] |
|
| Min | Max | ||
| J | -210 | 1200 | 0.09 |
| K | -250 | 1372 | 0.1 |
| S | -50 | 1767 | 0.29 |
| T | -250 | 400 | 0.11 |
| [1] See extended specifications for all TC types (B,C,E,J,K,L,N,R,S,T,U,XK,BP) [2] Best accuracy within specified TC temperature range |
|||
| Sample RTD and thermistor, output (does not include all available RTD types)[1] |
|||
| RTD Type | Temperature Range (°C) | Absolute Uncertainty, tcal ±5 °C, ± (°C), 1-yr |
|
| Min | Max | ||
| Pt 385, 100 Ω | –80 | 100 | 0.020 |
| 100 | 300 | 0.024 | |
| 300 | 800 | 0.038 | |
| YSI 400 | 15 | 50 | 0.007 |
| [1] See extended specifications for all RTD types: Pt-100 (385, 3926, 3916), Pt- 200, Pt-500, Pt-1000, Ni-120, Cu-427, SPRT | |||
| General Specifications | |||
| Standard interface | RS-232, IEEE-488 (GPIB) | ||
| Temperature performance |
Operating: | 0 °C to 50 °C | |
| Calibration (tcal): | 18 °C to 28 °C | ||
| Storage: | –20 °C to 70 °C | ||
| Electromagnetic compatibility |
CE: Conforms to EN61326; operation in controlled EM environments |
||
| Temperature coefficient | Temperature coefficient for temperatures outside tcal 5 °C is 10% of the 90-day specification (or 1 year if applicable) per °C |
||
| Relative humidity | Operating: | <80% to 30 °C | |
| <70% to 40 °C | |||
| <40% to 50 °C | |||
| Altitude | Operating: | 3,000 m (9,800 ft) max | |
| Non-operating: | 12,200 m (40,000 ft) max | ||
| Safety | EN/IEC 61010-1:2010 3rd Edition, UL 61010-1:2012, CAN/CSA 22.2 No. 61010-1-12 |
||
| Analog low isolation | 20 V | ||
| Line power | 120 V~: | 100 V to 120 V | |
| 240 V~: | 220 V to 240 V | ||
| Line frequency | 47 Hz to 63 Hz | ||
| Line voltage variation | ± 10 % about setting | ||
| Power consumption | 15 VA maximum | ||
| Dimensions | Height: | 14.6 cm (5.75 in) | |
| Width: | 44.5 cm (17.5 in) | ||
| Depth: | 29.8 cm (11.75 in) | ||
| Weight (without options) |
4.24 kg (9.35 lb) | ||
Accessories related to this product:
Fluke 7526A Precision Process Calibrator - Datasheet
Fluke 7526A Precision Process Calibrator - Getting Started Guide
Fluke 7526A Precision Process Calibrator - User Manual
Fluke 7526A Precision Process Calibrator - Calibration Manual
Fluke 7526A Precision Process Calibrator - Brochure Page
Fluke 7526A Precision Process Calibrator - Extended Specifications
Fluke 7526A Precision Process Calibrator - Calibration Manual Supplement
Reviews
Additional Information
| SKU | 7526A-256 |
|---|---|
| Model Ref | 7526A |
| Manufacturer Part Code | 4232125 |
| Country of Origin | China |
Made to Order item: This item is made-to-order with a lead time once the order is placed. Once an order is placed it cannot be cancelled or returned unless the unit is found to be faulty.
