The Fluke 369 FC is a leakage current clamp meter designed to help you pinpoint small current problems. It's also the larger version of Fluke's 368 FC, with wider jaw opening of up to 61mm.
This clamp meter's jaws are fully shielded, making them suitable for detecting small leakage signals. The jaws also will filter out electromagnetic interference, ensuring the results you get using the 369 FC are as accurate as possible.
Fluke's 369 FC is a true RMS clamp meter - it'll maintain its accuracy even testing on irregular waveforms. It can test current levels up to 60A with resolution of 1μA, catering for use in a wide variety of different applications.
As standard the 369 FC comes with Fluke Connect, Fluke's wireless networking system. With this, you can:
Measurement Function | AC (alternating current) |
AC Current Range(s) | 3mA, 30mA, 300mA, 3A, 30A, 60A |
mA/A: manual selection 3mA/30mA/300mA: automatic selection 3A/30A/60A: automatic selection |
|
Range/Resolution | 3mA/0.001mA |
30mA/0.01mA | |
300mA/0.1mA | |
3A/0.001A | |
30A/0.01A | |
60A/0.1A | |
Accuracy - Filter Activated (40 to 70Hz), Filter Off (40 to 1kHz) | 3mA to 30A: ±1% + 5 digits |
60A: 2% + 5 digits | |
Frequency | 40Hz to 1kHz |
Crest Factor | 3 |
Additional Specifications | |
---|---|
Display (LCD) | Digital readout: 3300 count |
Display Refresh Rate | 4 times/sec |
Maximum Conductor Diameter | 40mm |
Dimensions | 234 x 101 x 46mm |
Weight | 500g |
Battery | 2AA, IEC LR6, NEDA 15A, alkaline |
Battery Life | More than 150 hours (without backlight and spotlight) |
Automatic Shutdown | After 15 minutes of inactivity |
General Safety | IEC 61010-1: Pollution Degree 2 |
Measurement Safety | IEC 61010-2-032: CAT III 600V, CAT IV 300V |
Operating Temperature | -10 to +50°C |
Storage Temperature | -40 to +60°C |
Operating Humidity | Non-condensing (<10°C) |
90% relative humidity (10 to 30°C) | |
75% relative humidity (30 to 40°C) | |
45% relative humidity (40 to 50°C) | |
Protection Class | IEC 61557-13: Class 2, ≤30A/m |