Fluke 325 Clamp Meter & T130 Voltage/Continuity Tester Electrician Kit

The Fluke 325 Clamp Meter & T130 Voltage/ Continuity Electrician Kit is a promotional offer available until the 31st December 2024. It consists of the following Fluke instruments:

• Fluke 325 True-RMS Clamp Meter with Standard Accessories
• Fluke T130 Two-Pole Voltage/ Continuity Tester with Standard Accessories

Please see the descriptions below for further information regarding these products.

Fluke 325 True-RMS Clamp Meter Description

The Fluke 325 True-RMS Clamp Meter is a troubleshooting tool that can be used to measure the voltage, current, frequency and resistance of circuits. It is ideal for electricians working on commercial and residential systems.

The Fluke 325 True-RMS Clamp Meter can be used to measure the following electrical parameters:

• AC/DC current up to 400A
• AC/DC voltage up to 600V
• Resistance up to 40kΩ (with continuity detection ≤ 30Ω)
• Capacitance up to 1000µF
• Frequency between 5Hz and 500Hz
• Temperature between -10°C and +400°C

True-RMS AC voltage and current measurements mean the Fluke 325 True-RMS Clamp Meter can be used to measure non-linear signals accurately.

The Fluke 325 True-RMS Clamp Meter also includes a Min/Max function and a Data Hold function which freezes the measurement on the large, backlit display.

The Fluke 325 True-RMS Clamp Meter’s slim design ensures that it is easy to transport and is able to access components in tight spaces. It has a safety rating of CAT III 600V, CAT IV 300V.

The Fluke 325 True-RMS Clamp Meter is a rugged and reliable clamp meter optimised for efficient troubleshooting.

Fluke 325 True-RMS Clamp Meter Key Features

• Troubleshooting tool for measuring voltage, current, frequency and resistance
• Ideal for commercial and residential electricians
• AC/DC current up to 400A
• AC/DC voltage up to 600V
• Resistance up to 40kΩ (with continuity detection ≤ 30Ω)
• Capacitance up to 1000µF
• Frequency between 5Hz and 500Hz
• Temperature between -10°C and +400°C
• True-RMS for measuring the voltage and current of non-linear signals accurately
• Min/Max function
• Data Hold function
• Large, backlit display
• Slim design
• Safety rating: CAT III 600V, CAT IV 300V
• A rugged and reliable clamp meter optimised for efficient troubleshooting

Fluke T130 Two-Pole Voltage/ Continuity Tester Description

The Fluke T130 Two-Pole Voltage/ Continuity Tester can be used to check for the presence of voltage and continuity prior to commencing work on circuits.

The Fluke T130 Two-Pole Voltage/ Continuity Tester alerts the user to the presence of voltage using audible and vibrating alarms. The audible alarm can be switched off when testing in quiet areas. Additionally, the Fluke T130 Two-Pole Voltage/ Continuity Tester will indicate the voltage level on the backlit LED scale and will display the measurement on the backlit LCD. Measurements can be frozen to the Fluke T130 Two-Pole Voltage/ Continuity Tester’s display using the Hold function.

The Fluke T130 Two-Pole Voltage/ Continuity Tester also includes a switchable load feature to prevent the display of ghost voltages, allowing it to draw more current from the circuit-under-test and prevent RCDs from tripping.

Furthermore, the Fluke T130 Two-Pole Voltage/ Continuity Tester includes a single-pole phase test for fast identification of live conductors and a phase rotation indicator for three-phase systems.

The Fluke T130 Two-Pole Voltage/ Continuity Tester will indicate the presence of voltage even when its batteries have been discharged as it has been constructed in accordance with IEC EN 61243-3:2014. Moreover, the Fluke T130 Two-Pole Voltage/ Continuity Tester’s dual-insulated cable has been constructed to exceed the requirements stipulated in industry standards: the cable must be able to withstand a 45° bend in either direction and should remain functional after 5000 bend cycles. The Fluke T130 Two-Pole Voltage/ Continuity Tester’s cable can be bent to 150° in each direction and will continue to remain functional. For further information, please see the following video.

The Fluke T130 Two-Pole Voltage/ Continuity Tester’s tip caps have been designed according to HSE GS 38. The tip protectors are particularly useful when opening UK electrical safety outlets. This tester is supplied with push-on probe tips, probe tip protectors and a storage accessory and features improved probe docking for quick and secure storage.

Furthermore, the Fluke T130 Two-Pole Voltage/ Continuity Tester has a safety rating of CAT IV 600V, CAT III 690V. It also includes a low battery indicator, an integrated torch and large, easy-to-read buttons.

The Fluke T130 Two-Pole Voltage/ Continuity Tester is an ergonomic and efficient tool for ascertaining the presence of voltage and continuity.

Fluke T130 Two-Pole Voltage/ Continuity Tester Key Features

• Check for the presence of voltage and continuity prior to commencing work on circuits
• Audible and vibration alarms alert the user to the presence of voltage
• The audible alarm can be switched off when testing in quiet areas
• The backlit LED scale indicates the voltage range
• Voltage measurement is indicated on the backlit LCD
• Hold function
• Switchable load prevents the display of ghost voltages, allows the tester to draw more current and prevents the tripping of RCDs
• Single-pole phase test for fast identification of live conductors
• Phase rotation indication for three-phase systems
• Will indicate the presence of voltage even when the batteries have been discharged
• Constructed in accordance with IEC EN 61243-3:2014
• Dual-insulated cable can be bent to 150° in either direction which is three times the stipulated standard
• Tip caps have been designed according to HSE GS 38
• Tip protectors are useful when opening UK electrical safety outlets
• Supplied with push-on probe tips, probe tip protectors and a storage accessory
• Improved probe docking for quick and secure storage
• Safety rating: CAT IV 600V, CAT III 690V
• Low battery indicator
• Integrated torch
• Large, easy-to-read buttons
• An ergonomic and efficient tool for ascertaining the presence of voltage and continuity

What’s Included?

• Fluke 325 True-RMS Clamp Meter
• Test Leads (with 325)
• Soft Case (with 325)
• User Manual of the Fluke 325
• Fluke T130 Two-Pole Voltage/ Continuity Tester
• GS38 Probe Tip Sheath (with T130)
• 4 mm ∅ Probe Extensions (with T130)