Fluke 289 True RMS Logging Multimeter - FlukeView Forms Combo Kit

This special version of the Fluke 289 logging digital multimeter increases what's included as standard in the standard kit shipped with the 289.

What's Included?

As standard, the 289 ships with these items

• Fluke 289 Digital Multimeter
• 6 x AA Batteries (Installed)
• TL71 Silicone Test Leads
• 2 x AC72 Alligator Clips

This kit also adds the following:

• FlukeView Forms Software with Connection Cable (for analysing testing results on PC)
• 80BK-A Thermocouple Probe
• Amp Jack Plug Set
• C280 Soft Carrying Case

About the Fluke 289 Multimeter

The Fluke 289 makes troubleshooting easy - use this highly accurate digital multimeter to measure electrical parameters with a high degree of accuracy and log the results for further analysis!

With built-in datalogging capabilities included as standard, the 289 can store up to 50,000 testing records directly on the instrument, presenting information as a graph. Known as TrendCapturing, this graph will allow you to zoom in on specific sections to isolate faults and issues. With the 289, you'll spend less time testing and be able to fix problems much more efficiently.

Fluke 289 True RMS Logging Digital Multimeter Key Features

• Next-generation, high performance digital multimeter with built-in datalogging capabilities
• Ideal for tracking systems over a period of time to isolate specific issues
• Fluke Connect enabled - use the optional ir3000 FC connector to wirelessly send results to your smartphone or tablet
• TrendCapture mode graphically displays a logged data session directly on the multimeter, making it easy to find anomalies
• Zoom on trends - zoom in up to 14 times to get closer to the heart of the problem
• Selectable AC filter (smoothing mode) makes sure readings are steady when input signals are rapidly changing or electrically noisy
• Adjustable recording and automatic hold thresholds - specify your own percentage change in readings to begin new recording events
• Large-size, 50,000 count 1/4 VGA dot matrix display with integrated white backlight
• Log up to 15,000 individual records and view data back on the multimeter with no need to connect to PC
• Save multiple logging sessions before PC downloads are needed
• AC/DC voltage ranges - 50.000mV, 500.00mV, 5.0000V, 50.000V, 500.00V, 1000.0V
• AC/DC current ranges - 500.00μA, 5000.0μA, 50.000mA, 400.00mA, 5.0000A, 10.00A
• Temperature range - -200.0°C to 1350.0°C (-328.0°F to 2462.0°F)
• Resistance ranges - 500.00Ω, 5.0000kΩ, 50.000kΩ, 500.00kΩ, 5.0000MΩ, 50.00MΩ, 500.0MΩ
• Capacitance ranges - 1.000nF, 10.00nF, 100.0nF, 1.000μF, 10.00μ, 100.0μF, 1000μF, 10.00mF, 100mF
• Frequency ranges - 99.999Hz, 999.99Hz, 9.9999kHz, 99.999kHz, 999.99kHz
• Two terminal 50Ω range with 1mΩ resolution, 10mA source current for measuring and comparing differences in motor winding resistance or contact resistance
• Low pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and electrically noisy equipment
• LoZ volts function - low impedance voltage ensures ghost voltages are eliminated
• On-board information help key - if you're unsure about anything, hit the I key and the 289 will help you out!
• Real-time clock ensures all saved readings are time stamped for easy referencing
• Relative mode removes test lead resistance - ideal for low ohms or capacitance measurements
• True-RMS - ensures accuracy is maintained when testing AC voltage and current
• Measure up to 10A (20A for 30 seconds)
• 100mF capacitance range
• Peak capture to record transients as fast as 250μs
• Limited lifetime warranty