Fluke 17XX Power Quality and Electrical Measurement Adapters

These Fluke adapters are designed to allow the connection of either AC or DC clamps to all 17XX products. The adapter consists of a cable with the plug that fits the 17XX products and a female BNC connector allowing connection to other current clamps with mV/A outputs.

The clamps may be AC or DC (the 177X products are the only ones that can measure DC). This allows users who have invested in other current clamps in the past to use those devices if they meet the allowable specification of the current input of the measuring instrument.

Two adapters are available. 17XX-CLAMP-ADPT-1V is designed for use for current clamps with an output maximum value of 1V AC/DC. 17XX-CLAMP-ADPT-2V8 is designed for use with current clamps with an output maximum of 2.8V AC/DC.

Key Features

• Allows users to connect to a wider range of current clamps including measurement of DC for Fluke 177X products
• Gives the ability to use specialty current clamps
• Protects users' past investments in previously purchased current clamps from Fluke or other manufacturers
• CAT IV, 600V and CATIII 1,000V rating according to IEC61010-2-30
• Designed for use with current clamps with an output maximum of 1V AC/DC or 2.8V AC/DC

Product Range

• Fluke 5363472 17XX-CLAMP-ADPT-1V, 17XX BNC Adapter for Clamps 1MV/A, Max. 1V
• Fluke 5363485 17XX-CLAMP-ADPT-2V8, 17XX BNC Adapter for Clamps 1MV/A, Max. 2.8V

Fluke-17XX to BNC Adapters Key

1. Fluke 17XX current input connector
2. Female BNC connector
3. Internal conductor protection
4. Label indicating adapter type