Ideal for electricians and those working in industrial environments, this special kit version of the Fluke 179 Digital Multimeter includes everything you'll need for basic electrical testing.
Known for its reliability, accuracy and ease-of-use, the Fluke 179 is a must-have for professional technicians.
Packed full of features, the Fluke 179 is designed purely for helping to troubleshoot and repair electrical and electronic systems. It features a wide variety of useful features, including manual/automatic ranging, display-hold and auto hold, MIN/MAX/AVG recording. Functions and features are accessible via the Fluke 179 Digital Multimeter's front panel; it is also possible to perform a closed case calibration of this instrument through the front panel.
Further to this, readings are viewable via the Fluke 179's 6000-count digital display with an analogue bar graph.
You can use the Fluke 179 to measure:
These extensive measurement capabilities, combined with the Fluke 179 Digital Multimeter's ergonomic case with an integrated protective holster and its CAT IV 600V/ CAT III 1000V safety rating, make this instrument suitable for use in a variety of challenging environments. It is ideal for troubleshooting and repairing electrical installations.
The Fluke 80BK-A Integrated DMM Temperature Probe can be used with the Fluke 179 Digital Multimeter to conduct temperature measurements between -40 and 260ºC.
This practical, one-piece instrument consists of a type-K thermocouple with a standard banana jack. It is also supplied with a year's warranty.
The Fluke 80BK-A Integrated DMM Temperature Probe is ideal for extending the Fluke 179's scope-for-use.
The Fluke AC280 SureGrip Hook Clips have been optimised to improve steadiness when conducting electrical measurements. To this end, they include rubber over-moulded surfaces and finger-hugging curves to ensure a safe, secure and steady grip.
These clips are nickel plated and have been optimised for use with Fluke's TL222 and TL224 test leads. This product consists of one red and one black clip; each one is compliant with the following standards:
The Fluke AC280 SureGrip Hook Clips are supplied with a one-year warranty and are ideal for use with the above Fluke 179 Digital Multimeter.
The Fluke TL910 Electronic Test Probes are ideal for accessing difficult-to-reach test points as they include 1mm tips (100mm length).
In addition to this, the test lead has a length of 1m, again adding to the practicality of these probes.
This selection of probes includes three sets of spring loaded gold tips and two sets of stainless steel tips. All items are compliant with the standard CAT II 1000 V and have a 3A rating,
The Fluke TL910 Electronic Test Probes are ideal for expanding the Fluke 179 Digital Multimeter's scope-for-use.
The Fluke TL224 SureGrip Insulated Test Leads can be used with the Fluke AC280 SureGrip Hooks to extend the Fluke 179 Digital Multimeter's scope-for-use.
Like the Fluke AC280 SureGrip Hooks, the Fluke TL224 SureGrip Insulated Test Leads are optimised for steadiness and practicality. They are also rubber over-moulded and feature finger-hugging curves.
In addition to this, the Fluke TL224 SureGrip Insulated Test Leads provide reinforced strain relief and a banana jack for a variety of test lead configurations, adding to their practicality and versatility. Also, adding to the versatility of these test leads is the inclusion of a right-angled connector at one end and a straight connector at the other end.
These test leads have a safety rating of CAT IV 600V, CAT III 1000V, as well as a 10 A rating and a UL listing. They are 1.5m in length and silicone insulated, ensuring that they are able to resist the heat and cold.
The Fluke TL224 SureGrip Insulated Test Leads are a practical addition to the Fluke 179 Digital Multimeter.
The Fluke TPAK ToolPAK Magnetic Meter Hanger can be used to hang the Fluke 179 Digital Multimeter on an array of objects thereby facilitating handsfree operation of the test instrument.
To this end, it includes a magnetic hanger, 9-inch hook and loop strap, a hook hanger and a general purpose hanger. The inclusion of these items allow the user to hang Fluke TPAK ToolPAK Magnetic Meter Hanger and by extension digital multimeter on nails, hooks and a variety of other objects.
The Fluke TPAK ToolPAK Magnetic Meter Hanger is a practical addition to the Fluke 179 Digital Multimeter.
Spend £150+ (Ex VAT) on any qualified Fluke or Beha-Amprobe product(s) and claim a free tool of your choice from the list at Fluke Promotion. Valid February 17 2025 - July 31 2025.
Claims are made direct to Fluke. Terms and conditions apply.
Voltage (DC) | |
Accuracy | ±(0.09% + 2) |
Max Resolution | 0.1mV |
Maximum | 1000V |
Voltage (AC) | |
Accuracy | ±(1.0% + 3) |
Max Resolution | 0.1mV |
Maximum | 1000V |
Current (DC) | |
Accuracy | ±(1.0% + 3) |
Max Resolution | 0.01mA |
Maximum | 10A |
Current (AC) | |
Accuracy | ±(.1.5% + 3) |
Max Resolution | 0.01mA |
Maximum | 10A |
Resistance | |
Accuracy | ±(0.9% + 1) |
Max Resolution | 0.1Ω |
Maximum | 10A |
Capacitance | |
Accuracy | ±(1.2% + 2) |
Max Resolution | 1nF |
Maximum | 10000μF |
Frequency | |
Accuracy | ±(0.1% + 1) |
Max Resolution | 0.01Hz |
Maximum | 100kHz |
Temperature | |
Accuracy | ±(1.0% + 10) |
Max Resolution | 0.1°C |
Range | -40 to 400°C |
Environmental Specifications | |
Operating Temperature | -10 to 50°C |
Storage Temperature | -30 to 60°C |
Humidity (Without Condensation) | 0 - 90% (0 to 35°C) 0 - 70% (35 to 50°C) |
Safety Specifications | |
Overvoltage Category | EN 61010-1 to 1000V CAT III EN 61010-1 to 600V CAT IV |
Agency Approvals | UL, CSA, TUV listed and VDE pending |
General Specifications | |
Size | 43 x 90 x 185mm |
Weight | 420g |
Warranty | Lifetime |
Battery Life | Alkaline 200 hours typical without backlight |