Reward Points
:
1099
£1,318.80
£1,099.00
Free UK Delivery*
Fluke 1664 FC Multifunction Installation Tester
Fluke 1664FC Multifunction Installation Tester (1664MFT)
The Fluke 1664FC Multifunction Installation Tester is the most sophisticated model in Fluke’s 1660 Series of Multifunction Installation Testers. It can be used to test the safety of electrical installations in domestic, commercial and industrial environments, as well as verify the correct installation of fixed wiring and EVSE testing.
Out of all of Fluke's new multifunction testers, this model includes by far the most new features. One of the most impressive is the inclusion of the Auto Test function. Using this mode, the 1664 FC will automatically perform all required insulation tests in one sequence (that's 8 tests) - this reduces the number of manual connections, decreases the possibility of making errors and - overall - will help to reduce your testing times by up to 40% compared to Fluke's older multifunction testers.
For added safety, it features an Insulation PreTest function. This is the only multifunction on the market with this mode, it will warn you whether you're making mistakes; if an appliance is connected to the system under test, the tester will automatic stop the insulation test and provide a visual warning, ensuring your safety and that you don't accidentally damage essential equipment.
EVSE Testing
The firmware has been updated to support 6mA RDC-DD tests in accordance with international standards IEC 60964 and IEC 62752. Together with Fluke’s FEV300 Test Adapter, (sold seperately) this new ability enables comprehensive, accurate, and reliable testing of electric vehicle supply equipment (EVSE). It allows you to conduct all necessary tests in one go and meet the evolving needs of the EVSE market.
There's so much more to the Fluke 1664 FC - this multifunction tester will perform absolutely every test you need to check electrical installations in domestic, commercial and industrial environments. Test procedures include insulation, continuity, loop and line resistance, RCD trip time, prospective earth fault current, prospective short circuit current and much more.
Better still - the MFT has built-in memory and download capabilities, allowing you to store your measurement results and view them back later on a PC (Requires optional Fluke DMS or FlukeView software - sold separately) Alternatively, why not use Fluke Connect to interface with your smartphone and view all your data on there instead?
Fluke Connect
The 1664 FC is Fluke Connect enabled - it can wirelessly interface with smartphones and tablets, plus other Fluke Connect testing tools, to share information. With Fluke Connect, you can Share video directly to others on your team using ShareLive video calling on your smartphone running the Fluke Connect app, or you could use FlukeCloud storage to automatically store and retrieve your testing results, no matter where you are! Watch video below for more details on Fluke Connect.
All this is included in a rugged, reliable and easy-to-use unit. If you're a professional electrical installer, this tester is an excellent choice.
Videos
Fluke Multifunction Testers Overview
Fast, Safe and Smart - Introducing the Fluke 1664FC Multifunction Tester
What is Fluke Connect?
Key Features
- NEW - 6mA RCD-DD tests according to IEC 60964 and IEC 62752
- AutoTest mode - automatically performs 8 testing procedures, saving you time and effort!
- Insulation PreTest safety function automatically checks to see if appliances are connected to the installation and will limit testing if there are
- Insulation testing at L-N and N-PE inputs
- Loop and line resistance measurements with mΩ resolution
- Continuity testing at L-N and N-PE inputs
- Test smooth, DC-sensitive RCDs
- Earth resistance measurements
- Voltage and frequency measurements
- Wiring polarity checker
- Insulation resistance measurements
- Measure motor windings using the continuity test function
- Loop and line resistance measurements
- Prospective earth fault current (PEFC/IK) measurements
- Prospective short circuit current measurements (PSC/IK)
- RCD switching time function
- RCD tripping level (ramp test)
- RCD variable current
- Automatic RCD test sequences
- Phase sequence indicator
- Fluke Connect enabled - wirelessly interface with your smartphone, tablet or other Fluke Connect testing tools to share data using the Fluke Cloud, make video calls and much more
- On/off switchable auto starts for RCD and loop testing
- Self-testing function
- Z max memory
- Built-in memory storage with USB download (requires optional Fluke software)
- Heavy duty, single input line cord
What's Included?
- Fluke 1664 FC Multifunction Tester
- 6 x AA Cell Batteries
- Hard Carrying Case
- Zero Adapter
- Mains Test Cord
- Standard Test Lead Set
- Padded Carrying Strap
- Quick Reference Guide
- Remote Test Probe
- User Manual
Optional Accessories
You may want some of these useful additional items with your Fluke 1664 FC:
- 2104706: ES165X Earth Spike Kit
- 3301338: Zero Adapter
- 4013777: Remote Test Probe
- FLK-166X-MTC-UK 4601070: Mains Cord, UK Plug
What is the Difference Between the Fluke 1600 MFT Series?
There are three models in the 1600 series - the 1662, the 1663 and the 1664 FC. This table outlines the difference between the three units.
| Measurement Function | 1662 | 1663 | 1664 FC |
|---|---|---|---|
| Insulation-PreTest Safety Function | - | - | √ |
| Insulation at L-N, L-PE and N-PE inputs | - | - | √ |
| Auto Test Sequence | - | - | √ |
| Loop and Line Resistance with mΩ Resolution | - | - | √ |
| Continuity at L-N, P-PE and N-PE Inputs | - | √ | √ |
| Test Smooth, DC-Sensitive RCDs (Type B/B+) | - | √ | √ |
| EV Test 6 mA (RCD A/EV, RDC-DD) - NEW | - | √ | √ |
| Earth Resistance | - | √ | √ |
| Voltage TRMS (AC/DC) and Frequency | √ | √ | √ |
| Wiring Polarity Checker (Detects Broken PE and N Wires) | √ | √ | √ |
| Insulation Resistance | √ | √ | √ |
| Continuity and Resistance | √ | √ | √ |
| Measure Motor Windings with Continuity Test (@10mA) | √ | √ | √ |
| Loop/Line Resistance | √ | √ | √ |
| Prospective Earth Fault Current (PEFC/IK) | √ | √ | √ |
| Prospective Short-Circuit Current (PSC/IK) | √ | √ | √ |
| RCD Trip Time | √ | √ | √ |
| RCD Trip Current (Ramp Test) | √ | √ | √ |
| Measure Trip Time/Current for RCD type A/AC in One Test | √ | √ | √ |
| RCD Variable Test Current | √ | √ | √ |
| Automatic RCD Test Sequence | √ | √ | √ |
| Phase Sequence Test | √ | √ | √ |
| Other Features | |||
| Fluke Connect Compatibility | - | - | √ |
| ShareLive Calling | - | - | √ |
| Fluke Cloud Storage | - | - | √ |
| On/Off Switchable Auto Start for RCD and Loop Tests | √ | √ | √ |
| Self Test | √ | √ | √ |
| Illuminated Display | √ | √ | √ |
| Memory/Interface | |||
| Z Max Memory | - | √ | √ |
| Memory | - | √ | √ |
| IR-USB and BLE Interface (use with optional Fluke DMS software and FVF) | - | IR-USB | IR-USB/BLE |
Free Electrician's Accessory
- 50M R2 Extension Wander Test Lead (PVC Cable Reel) - TSTL50M, typically £49.00
- Lockout Starter Kit - Incl. Hasps, Padlocks, Tags, MCB Lockout & More - LT-LPP, typically £25.00
- TestSafe Fibreglass Fish Tape Cable Puller – 30m - TS-FG-FT-30M, typically £24.99
- Evik 10 Piece Cable Pulling Fibreglass Rods, Standard Kit in Tube - EV-STD-KIT-T, typically £39.00
Fluke 1600 Series Technical Specifications
| AC/DC Voltage (TRMS) | ||||
|---|---|---|---|---|
| Range | Resolution | Input Impedance | Overload Protection | |
| 500V | 0.1V | 3.3MΩ | 660V rms | |
| Continuity Testing (Rlo) | ||||
| Range (Autoranging) | Resolution | Open Circuit Voltage | ||
| 20Ω | 0.01Ω | >4V | ||
| 200Ω | 0.1Ω | |||
| 2000Ω | 1Ω | |||
| Insulation Resistance Measurement (Riso) | ||||
| Model Number | Test Voltages | |||
| 1662 | 100, 250, 500 and 1000V | |||
| 1663/1664 FC | 50, 100, 250, 500 and 1000V | |||
| Test Voltage | Insulation Resistance Range | Resolution | Test Current | |
| 50V | 20MΩ/50MΩ | 0.01MΩ/0.1MΩ | 1mA @ 50kΩ | |
| 100V |
20MΩ/100MΩ |
0.01MΩ/0.1MΩ | 1mA @ 100kΩ | |
| 250V | 20MΩ/200MΩ | 0.01MΩ/0.1MΩ | 1mA @ 250kΩ | |
| 500V | 20MΩ/200MΩ/500MΩ | 0.01MΩ/0.1MΩ/1MΩ | 1mA @ 500kΩ | |
| 1000V | 20MΩ/200MΩ/1000MΩ | 0.01MΩ/0.1MΩ/1MΩ | 1mA @ 1MΩ | |
| Insulation Pretest | ||||
| Insulation Safety Pretest | Requires the unit to be connected to L, N and PE | |||
| Loop and Line Impedance (Zi) | ||||
| Range | Resolution | |||
| 10Ω (Hi current mΩ mode) 20Ω/200Ω/2000Ω | 1mΩ / 0.01Ω / 0.1Ω / 1Ω | |||
| RCD Testing | ||||
| Model Number | Types Tested | |||
| 1662 | AC, G, S, A/F | |||
| 1663/1664 FC | A/F, AC, B/B+, G and S | |||
| RCD Trip Time Test (ΔT) | ||||
| Current Range | Step Size | Dwell Time | Measurement Accuracy | |
| Type G | Type S | |||
| 30 to 110% of RCD Rated Current | 10% of index IΔN | 300ms/step | 500ms/step | ±5% |
| Notes 30 % to 210 % for Type A IΔN = 10mA 20 % to 210 % for Type B |
Specified trip current ranges (EN 61008-1): 50 % to 100 % for Type AC 35 % to 140 % for Type A (>10 mA) 35 % to 200 % for Type A (≤10 mA) 50 % to 200 % for Type B |
|||
| Earth Resistance Test (RE) - Only Available On 1664 FC and 1663 | ||||
| Range | Resolution | Frequency | Output Voltage | |
| 200Ω | 0.1Ω | 128Hz | 25V | |
| 2000Ω | 1Ω | 128Hz | 25V | |
| Phase Sequence Indication | ||||
| Icon | Range | Display | ||
| Shows icon when active | 100 to 500V | 1-2-3 or 3-2-1 | ||
| General Specifications | ||||
| Dimensions | 10cm (L) x 25cm (W) x 12.5cm (H) | |||
| Weight (Including Batteries) | Approx 1.3kg | |||
| Battery Size | 1.5V type AA (IEC LR6) x 6 | |||
| Sealing | IP40 | |||
| Safety | Complies with IEC/EN61010-1, UL61010, ANSI/ISA - s82.02.01 and CAN/CSA c22.2 No. 1010 | |||
| Overvoltage | CAT III 500V, CAT IV 300V | |||
| Performance | EC/EN61557-1 to IEC/EN61557-7 and IEC/EN61557-10 | |||
Accessories related to this product:
Reviews
Additional Information
| SKU | 4547031 |
|---|---|
| Manufacturer Part Code | 4547031 |
| Model Ref | 1664FC UK |
| Country of Origin | Singapore |
