Always on for whenever you need it, the Fluke 2AC quickly detects the presence of AC voltage on electrical systems.
Fully non-contact, just hold the 2AC's tip as close as possible to a suspected voltage source. If there's voltage present on the circuit, the tip of the 2AC will begin to glow with a red light, instantly alerting the user that voltage is still present.
The Fluke 2AC voltage detector can be used to detect AC voltage from 200 to 1000V AC. The detector uses special low power circuitry to ensure its always on and ready for use and battery life of approximately an entire year means your Fluke 2AC will hardly ever need its standard AAA batteries replacing.
Spend £150+ (Ex VAT) on any qualified Fluke or Beha-Amprobe product(s) and claim a free tool of your choice from the list at Fluke Promotion. Valid February 17 2025 - July 31 2025.
Claims are made direct to Fluke. Terms and conditions apply.
Operating Principle | Senses the steady state electrostatic field produced by AC voltage through insulation without the need to make contact with a bare conductor. Red glow at tip indicates voltage presence |
Safety Compliance | Meets IEC 61010-1: 2001, UL 61010-1 (2nd. ed.), CAN/CSA-C22.2 No. 61010-04, ISA-82.02.01 Pollution degree 2 |
EMC Compliance | Meets IEC 61326-1: 2006 |
Operating | 200V AC to 1000V AC, CAT IV 1000V rated |
Temperature | Operating 10 to 50°C (-14 to 122°F) Storage -10 to 50°C (14 to 122°) |
Humidity | 0 to 95% (0 to 30°C) 0 to 75% (30 to 40°C) 0 to 45% (40 to 55°C) |
Altitude | 2000m (CAT IV 1000V) |
Cleaning | Clean with a damp cloth |
Battery Life | Typical battery life greater than one year |
Warranty Period | Two years |