FLIR MR176-KIT5 Imaging Moisture Meter

SKU

MR176-KIT5

Rating:

(0)

Reward Points

1499

£1,798.80 £1,499.00

Free UK Delivery*

FLIR MR176-KIT5 Imaging Moisture Meter w/ MR08 Hammer Probe & MR01 Temp/Humidity Sensor

Description

This special kit version of the FLIR MR176 Imaging Moisture Meter includes the following items:

FLIR MR176 Imaging Moisture Meter
MR01 Temperature and Relative Humidity Sensor
MR02 Standard Pin Probe
Quick Start Guide
International USB Charger
USB Cable
MR08 Hammer Probe

About the FLIR MR176 Imaging Moisture Meter

No more guesswork - with FLIR's MR176, you can find moisture in a material before you start testing.

Featuring a built-in FLIR Lepton thermal imaging camera, the MR176 allows you to visualise heat on an object and easily detect cold spots which are generally a sign of moisture intrusion. Once located, you can store up to 9999 images directly on the meter, then perform further testing using the pinless and pin measurement modes.

If you want even more verification that moisture is present, use the included pinless mode to scan the material without actually causing any damage. You can then study the material further by inserting the included pin probe directly into the material for an accurate, reliable reading of overall moisture content.

FLIR MR176 Moisture Meter Key Features

Visually identify moisture with infrared guided measurement (IGM)
80 x 60, 4,800 pixel Lepton thermal imager visually displays moisture as cold temperature spots
Customise thermal images - select what measurements you need (moisture, temperature, relative humidity, dew point, vapour pressure and mixing ratio)
Selectable colour palettes: iron, rainbow, ice and greyscale
Lock-image setting prevents extreme hot/cold temperature from interfering with results
Laser and crosshair pointer to easily reference the exact location of moisture issues
Field-replaceable temperature and relative humidity sensor
Progessive Environmental Stability Indicator removes response time error when you move through a site to different measurement locations
Use the integrated pinless moisture measurement mode for fast detection of moisture levels
Supplied with external pin moisture probe for measurements below the surface of a material
Rugged, portable design with intuitive menu system
Capture and transfer images to PC and interact with them using FLIR Tools software
USB cable included for image transfer

Tech Specs

FLIR MR176 Technical Specifications

Moisture Measurement
Imaging Detector	FLIR Lepton Microbolometer
Image Calibration	Automatic with manual lock scale option
Thermal Image Resolution (W x H)	4800 pixels (80 x 60)
Spectral Response	8 to 14μm
Field of View (W x H)	51 x 38°
Sensitivity	<150mK
Detection Limit (Wet Area Detection @ 32ft (10m)	19.7in² (49cm²)
Image Update Speed Frequency	9Hz
Thermal Image Palettes	Iron, Rainbow, Ice, Greyscale
Thermal Image Minimum Focus Distance	4" (10cm)
Parameter	Range	Basic Accuracy
Pin Moisture	7 to 30%	±1.5% MC
Pin Moisture	30 to 100%	Reference only
Pin Moisture Groups	9 material groups
Pinless Moisture Range	0 to 100	Relative
Pinless Measurement Depth	0.75" (19mm) max
Measurement Resolution	0.1
Response Time - Pinless Mode	100ms
Response Time - Pin Mode	750ms
Environmental Measurements
Parameter	Range	Basic Accuracy
Relative Humidity	0 to 100%	2.5% RH
Air Temperature	32 to 122°F (0 to 50°C)	±1.1°F (±0.6°C)
Dew Point	-22 to 122°F (-30 to 50°C)	±1.8°F (±1.0°C)
Vapour Pressure	0.0 to 12.0kPa	±0.05kPa
Mixing Ratio	0 to 560GPP (0.0 to 80.0g/kg)	±2GPP (0.25g/kg)
General Specs
Display Type	QVGA (320 x 240 pixels) 2.3" colour TFT graphical display
Saved Image File Format	BMP with measurement values overlaid
Storaged Image Capacity	9999 images
Laser Orientation	Single laser pointer to center of thermal image
Continuous Run Time	18 hours max
Typical Usage	4 work weeks
Battery	3.7V, 3000mAh Li-ion rehargeable via micro USB
Certification Standards	EN 61326 (EMC), EN 60825-1 Class 2 (laser)
Agency Approvals	CE, FCC Class B