Extech AN100 CFM/CMM Mini Thermo Anemometer

Small in size, big in capabilities - Extech's AN100 is a mini anemometer with a flexible vane sensor suitable for calculating air flow, air velocity and ambient temperature.

There's a huge variety of applications for the AN100; use it for HVAC installation, repair, diagnostics and optimisation; use it for fume hood testing, installation and verification; for environment wind and temperature testing and analysis and much, much more.

With the AN100, you can measure air velocity in m/s, km, h, ft/min, mph and knots with measurement range from 0.40 to 40.00m/s. Air temperature can be measured in Celsius and Fahrenheit from 14 to 140°F (-10 to 60°C) and airflow can be calculated in CMM and CFM from 0 to 9999CMM/CFM.

To give you a comprehensive overview, the AN100 simultaneously displays an ambient temperature reading alongside either an air velocity or air flow reading. You can also set up to 8 area dimensions (in feet or centimetres squared) in the internal memory for more accurate air flow calculations.

There's even more to the AN100; this anemometer includes a super-large, backlight LCD display, low friction ball bearing vane wheel sensor on 120cm cable, data hold, MIN/MAX and automatic power off functions.

Extech AN100 CFM/CMM Mini Thermo Anemometer Key Features

• Mini anemometer with flexible vane sensor attached via 120cm cable
• Measure air velocity in m/s, km/h, ft/min, mph and knots
• 0.40 to 30.00m/s range, 1.4 to 108.0km/h range, 80 to 5906ft/min range, 0.9 to 67.2mph range and 0.8 to 58.3knots range
• Calculate air temperature in Celsius and Fahrenheit from -10 to 60°C (14 to 140°F)
• 0 to 9999 CMM and CFM airflow measurement range
• Simultaneously display an air temperature reading plus an air flow or air velocity reading
• Set up to 8 area dimensions and recall from internal memory
• 20 point average function for air flow
• Super large backlit LCD display
• 3% velocity accuracy via low friction 2.83" (72mm) ball bearing vane wheel
• Data hold function freezes current value shown on the screen
• MIN/MAX measurement mode calculates the minimum and maximum values taken over a period of time
• Automatic power off when left idle to save battery life

What's Included?

• Extech AN100 CFM/CMM Mini Thermo Anemometer
• Vane Sensor with 3.9ft (120cm) Cable
• 9V Battery
• Protective Rubber Holster
• Carrying Case