Extech 407510 Heavy Duty Dissolved Oxygen Meter

Extech's 407510 is a dual function tester that can be used to accurately measure dissolved oxygen levels and temperature simultaneously.

This dissolved oxygen meter can measure dissolved oxygen levels from 0 to 20.0mg/L and 0 to 100% oxygen. It can also measure temperature levels from 32 to 122°F and both measurements are carried out via a polarographic type oxygen probe which is attached to the side of the meter.

Although this meter doesn't feature built in memory, it can be used in combination with an RS-232 cable and software package (sold separately) to display and capture readings on a PC. This also allows the setup of time intervals and alarms.

Additional features of this tester include fast 0.8 second sampling time, the ability to recall MIN/MAX/AVERAGE readings, a data hold function and an auto shut down mode which will activate when the device is left idle for a time period.

This tester is also compatible with Extech's 380340, which allows information to be datalogged.

Extech 407510 Heavy Duty Dissolved Oxygen Meter with PC Interface Key Features

• Large size 1.4" (36mm) LCD display
• Measures dissolved oxygen levels from 0 to 20.0mg/L
• Measures oxygen from 0 to 100%
• Temperature readings from 32 to 122°F (0 to 50°C)
• Automatic temperature compensation from 0 to 50°C via temperature sensor built into oxygen probe
• Fast response time of 0.8 seconds
• Recall of MAX/MIN and AVERAGE readings
• Data hold function
• Interfaces with PC via the use of RS-232 serial interface

What's Included?

• Extech 407510 Heavy Duty Dissolved Oxygen Meter with PC Interface
• 0.8" (20mm) Diameter Probe on 13ft (4m) Cable
• 5 x Membranes
• Rubber Holster
• 9V Battery
• Hard Carrying Case