The PACT SIGEN 2+ Signal Transmitter / Genny Electrician’s Kit consists of the P.A.C.T. SIGEN 2+ Signal Transmitter, a Carry Bag, a 100mm Signal Clamp and a 3-Pin Plug Connector. For an overview of the other PACT SIGEN 2+ Signal Transmitter / Genny Kits available, please see the ‘Available Kits’ section.
Please see the descriptions below for further information regarding the products included in this kit.
PACT SIGEN 2+ Signal Transmitter / Genny Description
The PACT SIGEN 2+ Signal Transmitter / Genny can be used to locate services and reduce the strike rate of electricians carrying out work. It can be used with cable locators capable of receiving 33kHz signals, such as PACT’s TOMKAT S2 and V2 Pipe and Cable Locators / CAT - Cable Avoidance Tools, to identify the location of cables and pipes.
To facilitates this instrument’s detection capabilities it is supplied, as standard, with an earth stake and connection leads. It is also supplied with a manufacturer’s calibration to ensure reliability and functionality.
Additionally, the PACT SIGEN 2+ Signal Transmitter is fitted with eight AA batteries proving the instrument with up to forty hours of continuous power. The absence of an audible tone indicates that the batteries require replacing.
The long operating time of the PACT SIGEN 2+ Genny adds to its practicality, as does its rugged ABS construction. The PACT SIGEN 2+ Signal Transmitter is also weatherproof to IP54 and has been CE tested. The rugged, weatherproof design of the PACT SIGEN 2+ Genny makes it suitable for use in a variety of rugged, outdoor environments, adding to its versatility.
The PACT SIGEN 2+ Signal Transmitter / Genny also includes an isolated transformer allowing it to be connected to a mains supply via a 3-pin plug connector (max mains rating: 230V AC), again expanding its scope-for-use.
Further to this, the PACT SIGEN 2+ Signal Transmitter includes two modes of operation, Induction and Connection, and low- and high-volume outputs. The low-volume output allows the operator to use the PACT SIGEN 2+ Genny in quiet environments, whilst its high-volume output allows the user to establish a better connection tone.
Moreover, the PACT SIGEN 2+ Signal Transmitter features a low-power output and a high-power output. It is possible to change from a low-power output to a high-power output at the flick of a switch. This allows the user to determine a familiar, continuous tone.
The PACT SIGEN 2+ Signal Transmitter / Genny is a resilient, adaptable and versatile instrument suitable for locating cables and pipes to ensure that electrical work can be carried out safely and effectively.
PACT SIGEN 2+ Signal Transmitter / Genny Key Features
- Locate services and reduce the strike rate of electricians carrying out work
- Can be used with cable locators capable of receiving 33kHz signals
- Suitable for use with PACT’s TOMKAT S2 and V2 Pipe and Cable Locators / CAT - Cable Avoidance Tool
- Locate cables and pipes
- Supplied as standard with an earth stake and connection leads
- Supplied with a manufacturer’s calibration
- Equipped with eight fitted AA batteries providing up to forty hours of continuous power
- The absence of an audible tone indicates when the batteries need replacing
- Rugged ABS construction
- IP54
- CE tested
- Suitable for use in a variety of outdoor environments
- Isolated transformer facilitating a connection to a mains supply via a 3-pin plug connector (max mains rating: 230V AC)
- Two modes of operation: Induction and Connection
- Low- and high-volume outputs
- Low-volume output allows the transmitter to be used in quiet locations
- High-volume output allows the user to establish a better connection tone
- Low-power and high-power output
- Change from a low-power output to a high-power output at the flick of a switch to determine a familiar, continuous tone
- A resilient, adaptable and versatile instrument
- Suitable for locating cables and pipes to ensure that electrical work can be carried out safely and effectively
PACT 100mm Signal Clamp Description
The PACT 100mm Signal Clamp can be used with PACT’s SIGEN2+ Signal Transmitter / Genny and one of PACT’s TOMKAT S2 or V2 Pipe and Cable Locators / CAT - Cable Avoidance Tools to detect and trace buried insulated cables, such as those used by street lights.
Its 100mm diameter ensures that it is able to fit around insulated conductors allowing the user to apply a signal directly and safely to the cable. Furthermore, the P.A.C.T. 100mm Signal Clamp’s wide diameter means that good contact with a conductor is established without having to remove any insulation.
The PACT 100mm Signal Clamp is operated using the following method:
1.) Plug the bulgin plug into the SIGEN 2+’s connection socket within the accessory compartment
2.) Enclose the clamp’s jaws around the cable-under-investigation, ensuring that the jaws are completely closed
3.) Turn on the SIGEN 2+
4.) Set PACT’s TOMCAT Pipe and Cable Locators to Genny Mode and trace the cable
The PACT 100mm Signal Clamp is a simple-to-use instrument allowing the user to safely, efficiently and accurately trace insulated cables by applying a signal directly to the conductor.
PACT 100mm Signal Clamp Key Features
- Use with the SIGEN 2+ Signal Transmitter / Genny and one of PACT’s TOMKAT Pipe and Cable Locators / CATs
- Detect and trace buried, insulated cables such as those used by street lights
- 100mm diameter
- Apply a signal directly and safely to the cable
- A good contact to the conductor is established without having to remove any insulation
- Simple-to-use instrument
- Safely, efficiently and accurately trace insulated cables by applying a signal directly to the conductor
PACT 3-Pin Plug Connector Description
The PACT 3-Pin Plug Connector can be used to apply a signal directly to a mains supply via a domestic socket. This connector features a 2m lead.
What’s Included?
- PACT SIGEN 2+ Signal Transmitter / Genny
- Earth Stake
- Connection Leads
- Manufacturer’s Calibration
- 8x AA Batteries – Fitted
- Carry Bag
- 3-Pin Plug Connector
- 100mm Signal Clamp
Available Kits
There are four P.A.C.T. SIGEN 2+ Signal Transmitter Kits available; please see the table below for a quick overview of the items included in each kit.
Kit | P.A.C.T. Products | ||||||||
PACT SIGEN 2+ Signal Transmitter | Manufacturer's Calibration | 8x AA Batteries - Fitted | Earth Stake | Connection Lead Set | Carry Bag | 3-Pin Plug Connector | 100mm Signal Clamp | 5m Sonde (33kHz) | |
PACT SIGEN 2+ Signal Transmitter Standard Kit | X | X | X | X | X | X | |||
PACT SIGEN 2+ Signal Transmitter Electrician’s Kit | X | X | X | X | X | X | X | X | |
PACT SIGEN 2+ Signal Transmitter Drain Kit | X | X | X | X | X | X | X | ||
PACT SIGEN 2+ Signal Transmitter Builder's Kit | X | X | X | X | X | X | X | X |
P.A.C.T. SIGEN 2+ Signal Transmitter Technical Specifications
Off | Transmitter is turned off in this position |
Induction Mode | 33 kHz continuous |
Connection Mode | 33 kHz continuous |
Protection | Isolation transformer allows direct connection via a 3 pin plug connector to mains supply (mains rating is 230 VAC maximum) |
Power Output | low output 0.25-watt high output 1.0 watt |
Audio Induction Mode | Audible continuous |
Audio Connection Mode | Audible continuous tone with distinct tone change confirms a good connection is made |
Audio On/Off | No tone indicates battery replacement required |
Batteries | 8 x AA alkaline supplied fitted typical battery life 40 hours continuous use |
Operating Temperature | -20C to + 50C |
Compatibility | Will work with all locators receiving a 33kHz signal |
Accessories | Supplied with earth stake & connection leads |
Construction | Moulded from high impact ABS weatherproof to IP54 CE tested |
Dimensions | 285mm x 185mm x 195mm |
Shipping Box Size | 305mm x 205mm x 215mm |
Weight | 2.5kg |
Reviews
SKU | GB2018EK |
---|---|
Manufacturer Part Code | GB/2018/EK |