Oscilloscope Accessories
Optional software packages for controlling an oscilloscope's functionality/parameters via PC and carrying cases specifically designed for porting equipment from area to area are all available in this category.
Find out more about Oscilloscope Accessories below.
- Suitable racking plate for the RM300/RM300A
- Not recommended for use as a battery charger
- Rack blanking plate
- Suitable for RM410
- Not recommended for use as a battery charger
- GPS antenna
- SMA(M), 100cm
- Suitable for the SHA850A Series
- Additional/Replacement Universal AC Adaptor
- Suitbale for the PSA Series 2 or 5, TF930/960 and, I-prober 520
- Type B
- 5.0V/2A
- For use with Aim-TTi's PSA Series 2 and 5 Analysers
- AC-DC adapter
- Suitable for the SHA850A Series
- 2GHz bandwidth
- Male N-to-BNC cable
- 0.7m (27.6 inches) in length
- Adds temperature measurement
- Dual input temperature adapter
- 10M Ohm input impedance
- For use with Aim-TTi’s PSA Series 2 and Series 5 Spectrum Analysers
- Determine the frequency of RF sources
- Take relative measurements of amplitude
- Safety designed
- Two adapters in a pack
- Female BNC to shielded banana adapter
- 30V CAT II rated
- Suitable for the 120/190 Series
- USB connector adapter
- Suitable for use with the Fluke 120B Series ScopeMeters
- Black, red & grey clips
- Nickel-plated steel jaw contact material
- Designed for use with STL 120 Shielded Test Leads and TL75 Test Leads
- Detachable external pouch
- Dimensions: 10 x 5.2 x 1"
- Passive oscilloscope probe
- Suitable for use with the 350MHz models
- Store and transport
- Portable bag
- Suitable for the SHA850A Series
- High-quality SMA terminated cable has low-loses of up to 6GHz
- SMA to N-type adapters for connecting the PSA to a generator
- BNC to N-type adapters for use with BNC cables
- High quality
- Specifically designed for Aim-TTi
- Not recommended for use as a battery charge
- Allows for hands-free operation
- Suitable for the ScopeMeter Series 190 II
- Soft carry case
- Store and transport Aim-TTi’s PSA Series 2 & 5 Spectrum Analysers
- Consists of two adapters
- Male BNC to dual female BNC T-piece
- Hard carrying case for testers + accessories
- Briefcase-style
- High durability
- Passive oscilloscope probe
- Suitable for use with the 500MHz models
- 4U rack unit
- Compatible with 19" racks
- Suitable for the SDS1000X-E and SDS2000X-E oscilloscope models
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.
