EA Technology UTL2 UltraTEV Locator2 Kit
- Suitable for the UltraTEV Plus²
- Carrying Case
- Sensors listen for TEV pulses
The Locator probe is used with the UltraTEV Plus² to locate further TEV activity, detected during a routine PD survey of substation assets.
The Locator probe adds a second TEV sensor to the UltraTEV Plus2. Both TEV sensors listen for TEV pulses, and when they both detect pulses they calculate the difference in arrival time. The standard Locator mode shows which probe detected the signal first, indicating the source is closer to that probe.
In some cases of PD, such as when multiple sources are present, it can be helpful to have more information than which probe is closer to the source. For such cases, the Locator Advanced Mode provides additional information in the form of a histogram which can be used to accurately assess the live data. This live data can be used to locate multiple sources at the same time.
The Locator probe is supplied in its carry case which can be attached to the top or bottom of the UltraTEV Plus² carry case, by rotating the blue T-lock.
Call 01642 931 329 or complete the form:
| UltraTEV Plus2 Locator Probe Specification | |
|---|---|
| TEV | |
| Sensor | Capacitive |
| Measurement Range | 0 - 60dBmV |
| Resolution | 1dB |
| Measurement Bandwidth | 3 - 80 MHz |
| Accuracy | ±1dB |
| Locator Probe Precedence | 0.3ns equivalent to 10cm |
| HARDWARE | |
| Enclosure | Self-colour injection moulded plastic case |
| Indicators | Power indicator LED |
| Controls | 3 x push-buttons |
| Connectors | Cable to UltraTEV Plus2 |
| DIMENSIONS | |
| Size | 201mm x 76mm x 34mm with a 2m long cable |
| Weight | 00.36kg |
| ENVIRONMENTAL | |
| Operating Temperature | -10 to 55 degrees C |
| Humidity | 0 - 90% non-condensing |
| IP Rating | 42 |
