The DiLog DL9110 Multifunction Installation Tester is compliant with the safety and performance requirements detailed in the BS EN 61557 specification. To this end it includes the following testing capabilities:
The DiLog DL9110 18th Edition Multifunction Installation Tester features a unique auto start RCD-LOC XLT loop test principle; this prevents the tripping all RCD types and RCBOs during testing whilst maintaining a high accuracy. Further to this, the DiLog DL9110 18th Edition Multifunction Installation Tester is capable of running the above RCD tests for the RCD types AC, A and S. When testing any of the aforementioned RCD types in the auto-test mode the test results can be recalled once all checks have been completed.
The prospective short circuit current, high-current loop, and continuity tests also all feature an auto-start. In addition to this, the DiLog DL9110 18th Edition Multifunction Installation Tester offers a direct readout of PSCC tests; a null feature for zeroing test lead resistance during continuity tests; and provides a high-current Ze measurement for high-current loop tests.
Measurements are indicated on the DiLog DL9110 18th Edition Multifunction Installation Tester’s colour changing, RGB LCD display. This multifunction tester features the largest screen of any multifunction installation tester designed for use in the UK. As well as indicating measurements, the display will change colour to alert the user of an error.
The DiLog DL9110 18th Edition Multifunction Installation Tester is also equipped with a comfortable neck harness designed to facilitate easy operation.
With regards to the safety of this instrument, the DiLog DL9110 18th Edition Multifunction Installation Tester is equipped with full range protection that protects the tester, and by extension, the user, should the DL9110 be accidentally connected to a voltage during a dead test.
The DiLog DL9110 18th Edition Multifunction Installation Tester is a comprehensive, cost-effective and modern electrical testing instrument. It is ideal for extensively checking, troubleshooting and maintaining electrical installations in accordance with 18th Edition specifications.
The DiLog DL9110 18th Edition Multifunction Installation Tester is the entry model in DiLog's DL911X 18th Edition Multifunction Installation Tester range. Please find below a comparison chart detailing the differences and similarities between the DL9110 and its sister product the DL9118, as well as this tester's technical specifications.
Feature | DL9110 | DL9118 |
Continuity Test | • | • |
Insulation Test | 250V & 500V | 250V, 500V & 1000V |
Auto Start Loop & Continuity | • | • |
RCD Test (AC, A & S types) | • | • |
Colour RGB Display | • | • |
Colour Changing to indicate error | • | • |
Auto RCD Test | • | • |
RCD Ramp Test | • | • |
Loop Test (3 wire Non-Trip) | • | • |
PFC & PSC Fault Current (L-PE/L-N) | • | • |
Phase - Phase Line Test (L-L) | • | |
Phase Rotation | • | |
Remote Probe | • | |
Intelligent Full Range Protection | • | • |
Display | 3 1/2 digit LCD 1999 digits |
Insulation Resistance | 0.05 - 2000MΩ |
Test Voltage at 1mA | 250 & 500V |
Continuity | 0.05 - 199Ω |
Loop Impedance | 0.01 - 2000Ω |
PSCC | 0 - 26kA |
RCD nominal test currents | 10, 30, 100, 300, 500mA, 1/2 x 30mA, 5x 30mA |
Trip Time | 0 - 500ms |
Tripping Current with Ramp Test | 1/2 rated current to 1.1 rated current |
Voltage | 0 - 440V |
Frequency | 45 - 65Hz |
Safety Standards | EN61010, BS EN 61557, BS 7671 |
Over voltage category | CAT III 440V |
Power Supply | 6 x 1.5 V AA Batteries |
Dimensions | 260 x 105 x 55mm |
Weight | 836g |