Please note that this tester is available in either its standard form or can be supplied with silicone protection to make the meter suitable for liquid pressure measurements.
Need to measure pressure over a wide range? Comark’s C955 pressure meter can be used to measure pressure levels from 0 to 2000mBar with selectable pressure units of PSI, mBar, inH20, inHg, mmHg, torr, KPa, cmH20 and Kgcm-2.
Including two connectors at the top of the meter, the C955 can measure both positive and negative (vacuum) pressure and can be used to determine gauge and differential pressure measurements. A suite of functions for expanding measurements, including MAX/MIN and data hold are also included as standard.
This meter is IP67 rated for protection against dust and water ingress.
Comark C95555 Pressure Meter Key Features
- High accuracy with speedy response
- Twin inputs suitable for gauge and differential pressure measurements
- Selectable pressure units: PSI, mBar, inH20, inHg, mmHg, torr, KPa, cmH20 and Kgcm-2
- Silicone protection option available for liquid pressure measurements
- Positive or negative (vacuum) pressure measurements
- Positive and negative ports
- Clear LCD
- Adjustable zero value
- MAX/MIN pressure measurements
- Data hold function
- Average reading function
- Recording mode
- Overrange indication – maximum over/under pressure 90PSI/6200mBar
- On-screen alert for readings over 9999
- Selectable auto switch off
- Dust and waterproof to IP67, BS:EN60529, IEC529
- Long battery life: up to 125 hours of continuous use
- Supplied with a 9V PP3 6F22 battery
- Low battery indication
- Supplied with 4x 1/8" BSP Nylon Washers, 1.4m Polyurethane Tube SP Blue and 2x Male Stud Coupling with Washer
What’s Included?
- Comark C9553 Pressure Meter
- 4x 1/8" BSP Nylon Washers
- 1.4m Polyurethane Tube SP Blue
- 2x Male Stud Coupling with Washer
- 9V PP3 6F22 Battery
Comark C9555 Technical Specifications
Pressure Measurement Range | 0 to ±2100 mBar |
Resolution | 0.1mBar |
Accuracy | ±0.2% of full scale (FS) at +23°C |
Repeatability | ±0.1% of full scale (FS) at +23°C |
Mean Temperature Coefficient of Reading | <0.1% per °C |
Operating Temperature Range | 0 to 50°C |
Humidity Range | 10 to 90% RH non-condensing |
EMC | Tested to EN61326-1 Criteria B performance |
Environmental Protection | IP67, BS:EN60529, IEC529 |
Battery | *9V PP3 6F22 — MN1604 UCAR9V |
125 hours (using MN1604) | |
*Non-IS Models Only. IS models must only use Zinc Chloride Battery | |
Low Battery Warning | Displays BAT just before end point of battery |
Over Pressure Indication | – – – – |
Over 9999 Reading Indication | Lowest 4 digits blink |
Connections | 1/8" BSP female |
Dimensions | 175 x 82 x 32mm |
Weight | 330gm including battery |
Reviews
SKU | C9555-SIL |
---|---|
Manufacturer Part Code | C9555 |