Reward Points
:
119
£143.76
£119.80
Chauvin Arnoux VX0003 BioTest LF Electric Field Tester
Detect the level of elecromagnetic radiation given off from electrical equipment with this magnetic field tester!
Featuring a built-in internal sensor, the VX0003 uses a dual LED scale to show the level of detected EMF radiation. It's suitable for use with a wide variety of electrical equipment, including computers, printers and fax machines, lighting and HV power lines, transformers, railways and other applications.
The VX0003 has two measurement modes. Using the traditional mode, the user connects the tester to earth with the field referenced against earth. Using the representative mode, there's no cables required and the user's presence is taken into account when measuring to maintain accuracy.
Chauvin Arnoux VX0100 BioTest LF Electric Field Tester Key Features
- Two measurement modes: representative (takes into account user's magnetic field) or traditional (fields references to earth)
- Test pollution generated by electrical power distribution from 0 to 3kHz
- Ideal for testing the magnetic fields given off from electrical power distribution, electrical cables, surge protectors, computers, lighting and more
- Made in compliance with a wide variety of standards including IEEE C95.6-2000, European DIrectives and others
- Measurement range from 10Hz to 30kHz
- Handheld, portable design
- Battery life of approximately 60 to 80 hours
- 2 year manufacturer's warranty included
- Dual LED scales show EMF level
- Delivered with a socket tester for determining phase position and presence of earth
What's Included?
- Chauvin Arnoux VX0100 BioTest LF Electric Field Tester
- 5m Earth Cable (HX0103)
- Socket Tester
- Belt Bag (HX0109)
Chauvin Arnoux VX0 Series Technical Specifications
| Model | VX 0003 | VX 0100 |
|---|---|---|
| Display and Buzzer | ||
| Display Type | Dual LED | 2000 count backlit LCD |
| Direct Display in Volt/m (Compatible with Standards) | √ | √ |
| Buzzer Proportional to the Level of the Field E | √ | √ |
| Indication of Measurement Frequency Range | - | √ |
| Low Battery and Hold Indicators | √ | √ |
| Commands | ||
| Start/Stop (with automatic stop 30mn) | √ | √ |
| Measurement Hold Function | √ | √ |
| Buzzer Start/Stop | √ | √ |
| Selection of Measurement Range | Manual | Automatic |
| Selection of 3kHz Filter (<, >, Full Band) | - | √ |
| Antenna and Reference | ||
| Antenna Type | Built-in field antenna (inside casing) | Removable 62mm field antenna |
| Cable Detection Function | - | √ |
| Field Measurement Referenced to Individual | √ | √ |
| Field Measurement Referenced to Earth | √ | √ |
| +Rod | - | √ |
| Measurement | ||
| RMS Electric Field Intensity in V/m | √ | √ |
| Sensitivity Ranges | 5 to 100V/m 100 to 2000V/m |
1.0 to 200.0V/m 100 to 2000V/m |
| Accuracy (in Laboratory Conditions) | ±10% on LED thresholds | ±3% ± 5D at 50/60Hz |
| Analysis of Electrical Distribution, 10Hz to 3kHz | √ | √ |
| Analysis of Equipment Connected to Mains | 10Hz to 3kHz | 5Hz to 3kHz (3kHz low-pass filter) 3kHz to 100kHz (3kHZ high-pass filter) 5Hz to 100kHz (3kHz without filter) |
| General Specifications | ||
| Power | 9V battery (included) Battery life of 80 hours Automatic shutdown after 30 minutes |
|
| Safety/Protection | Single earth terminal Protected reference contact |
Reversed (M/F) antenna and earth terminals Protected reference contact |
| Metrology | Metrological monitoring available via the Chauvin Arnoux/AEMC network | |
| IP Rating | IP65 | |
| Dimensions | 63.6 x 163 x 40mm | |
| Weight | Approx 200g (with battery) | |
| Warranty | 2 years | |
Reviews
Additional Information
| SKU | VX0003 |
|---|---|
| Manufacturer Part Code | VX0003 |
| Country of Origin | France |
