Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Chauvin Arnoux PEL115 Power & Energy Logger
- Four voltage inputs and four current inputs
- IP67-rated, waterproof, all-terrain case
- Optimised for outdoor electricity poles
- Complete Kit available
SKU
CA-PEL115
Chauvin Arnoux PEL115 Power & Energy Logger
Equipped with four voltage inputs, four current inputs, and an IP67-rated, waterproof, all-terrain case, the Chauvin Arnoux PEL115 Power & Energy Logger is an electricity monitoring tool specifically designed for use on outdoor electricity poles. The PEL115 can be installed without cutting off the mains supply; is self-powered by the phase; and will log multiple electrical parameters over several months, as well as break down energy losses.
Measurements & Functions
The Chauvin Arnoux PEL115 helps you to determine and analyse useful, unbalanced active, harmonic active, non-active, reactive, distorting, and apparent energy. To this end, it offers the following measurements and functions:
- RMS and DC measurement with 128 samples/cycle simultaneously on each phase
- AC/DC voltage up to 1000V
- Current up to 10 kA AC, 5 kA DC (depending on the current sensor)
- Active, reactive (N, D, QF) and apparent power values
- Active energy values
- Fundamental active power values (Pf)
- Balanced active power values (P+)
- Unbalance active power (Punb)
- Motor measurement and characterisation
- Breakdown of energy losses
- Phase data: cos, tan, power factor (PF)
- Crest factor
- THD calculation for currents and voltages
- DC, 50Hz, 60Hz, and 400Hz (Naval, etc)
Automatic recognition of the connected sensor makes measurements easier and more efficient while the PEL115’s voltage and current ratios equip it with extensive measurement ranges.
All data and calculated results are saved to the PEL115’s removable SD card.
PEL Transfer Software
Supplied for free with the PEL115, the PEL Transfer Software facilitates the configuration of the power and energy logger, as well as data analysis and report creation. It enables:
- Unit set-up
- Connection verification
- Result download
- Analysis of power measurement campaigns
- Highlighting of energy losses
- Break down of energy values
- Generation of energy consumption reports
Consequently, Chauvin Arnoux’s PEL Transfer Software provides you with all the precise, relevant data required to make and prioritise effective corrections.
Android Application
In addition to the PEL Transfer Software, the PEL115 is compatible with Chauvin Arnoux’s Android App, enabling motor diagnostics. Furthermore, via this app, you can view the PEL115’s connection to the electrical network.
Communication Interfaces
Four communication interfaces enable data transfer and real-time monitoring:
- Ethernet: facilitates the interconnection of PELs, allowing them all to be controlled via the PEL Transfer Software; this interface can be used at the same time as the Wi-Fi interface
- Wi-Fi: using this interface, the PEL115 can be connected to a company’s IT network via a server or directly to a PC/smartphone
- IRD DataView® Synch: view data from anywhere around the world via a secure server
- USB: control/configure the PEL115 and download data
Applications
The Chauvin Arnoux PEL115 is specifically designed for use on outdoor electricity poles. Nevertheless, it can be used across a range of sectors, including:
- Renewable energies: photovoltaic, wind, hydroelectric, thermal, thermo-dynamic
- Process industries: metallurgy, glassmaking, paper, chemicals, and agri-food
- Building, construction, and renovation: housing and facilities
- Public services/transport: the PEL113 can be used to monitor lighting, roads, motorways, tunnels, and rail systems where energy consumption is occurring
- Datacentre: monitoring and analysing electrical energy consumption
It is suitable for the following applications.
| Energy Audits | Voluntary (ISO 50001, etc.) or mandatory operation aiming to reduce energy consumption: buildings, housing, infrastructure, equipment, etc. |
| Implementation of measurement campaigns focused on energy for comprehensive diagnosis of the electrical installation |
|
| Identification of the causes of overconsumption by the equipment or overbilling |
|
| Preventative & Predictive Maintenance | Industrial equipment monitoring |
| Analysis of consumption due to the air-conditioning, ventilation and heating systems |
|
| Sizing of a power factor correction cabinet | |
| Redistribution of the loads on the electrical grid | |
| + Motor diagnostics: measurement of a motor’s speeds, efficiency and torque without using mechanical sensors |
Rugged and reliable, the Chauvin Arnoux PEL115 Power & Energy Logger is the perfect tool for outdoor energy/electricity monitoring/auditing.
Key Features
- Electricity monitoring tool with four voltage inputs and four current inputs
- IP67-rated, all-terrain, waterproof case
- Specifically designed for outdoor electricity poles
- Can be installed without cutting off the mains supply
- Self-powered by the phase
- Log multiple electrical parameters over several months
- Break down energy losses
- Useful energy
- Unbalance active energy
- Harmonic active energy
- Non-active energy
- Reactive energy
- Distorting energy
- Apparent energy
- RMS and DC measurement with 128 samples/cycle simultaneously on each phase
- AC/DC voltage up to 1000V
- Current up to 10 kA AC, 5 kA DC (depending on the current sensor)
- Active, reactive (N, D, QF) and apparent power values
- Active energy values
- Fundamental active power values (Pf)
- Balanced active power values (P+)
- Unbalance active power (Punb)
- Motor measurement and characterisation
- Breakdown of energy losses
- Phase data: cos, tan, power factor (PF)
- Crest factor
- THD calculation for currents and voltages
- DC, 50Hz, 60Hz, and 400Hz (Naval, etc)
- Voltage and current ratios provide an extensive measurement range
- Automatically recognises the connected sensor type
- Data is saved to a removable SD card
- PEL Transfer Software for configuration, analysis, and reporting
- Android application with motor diagnostics
- Ethernet
- Wi-Fi
- IRD DataView® Synch
- USB interface
- Optimised for outdoor electricity poles but also suitable for renewable energies, process industries, building, construction, renovation, public services/transport, and data centres
- Ideal for energy audits and preventative and predictive maintenance
- The perfect tool for outdoor energy/electricity monitoring/auditing
What’s Included?
- PEL115 Logger
- Chauvin Arnoux PEL115 Power & Energy Logger
- 5x IP67 Voltage Cables
- 5x Lockable Crocodile Clips
- Set of Insert/Rings
- SD Card
- SD Card-USB Adapter
- USB Cable
- PEL Transfer Software
- Quick Start Guide
- Accessories Bag
- PEL115 Complete Kit
- Includes everything in the PEL115 Logger and the following:
- 4x MA196-350 Miniflex Clamps
- 5x Reelin Boxes
- 5x Mag Probes
- Dataview Software
Offers
FREE Powerbank / Wireless Charger
- PASS Power Bank & Magnetic Wireless Charger (10 000mAh 15W) - PASSPOWER-PLUS, typically £49.00
Technical Information
Specification
| PEL112 | PEL113 | PEL115 | |
| Display | None | Quadruple digital display | |
| Types of installations | Single-phase, split-phase, three-phase with or without neutral, and many other specific configurations | ||
| Number of channels | 3 voltage inputs, 3 current inputs (neutral current calculated) | 4 voltage inputs, 4 current inputs | |
| Measurements | |||
| Network frequencies | DC, 50 Hz, 60 Hz and 400 Hz | ||
| Voltage (measurement ranges) | 10.00 - 1,000 Vac / 100.00 – 1,000 Vdc | ||
| Current (see previous page) | 5 mAac to 10 kAac / 50 mAdc to 5 kAdc | ||
| Calculated measurements | |||
| Ratio | Up to 650,000 V / up to 25,000 A | ||
| Power (P, Pf, P+, Punb, Qf, N, D, S) | 10 W to 10 GW / 10 var to 10 Gvar / 10 VA to 10 GVA | ||
| Energy | Up to 4 EWh / 4 EVAh / 4 Evarh (E = 1018) | ||
| Phase | cos φ, tan Φ, PF | ||
| Harmonics | THD | ||
| Additional functions | |||
| Phase order | Yes | ||
| Min / Max | Yes | ||
| Alarm | Yes | ||
| Mounting | Magnet | Hook (Opt.) | |
| Recording | |||
| Acquisition rate / Aggregation period | 5 measurements/s - 1 min to 60 min | ||
| Data storage | SD card, 8 GB (up to 32 GB on SD-HC card) | ||
| Communication | USB, Ethernet, Wifi (Access point and Hotspot), IRD Server DataView® Synch | ||
| Power supply | 110 V - 250 V (+10 %, -15 %) at 50-60 Hz & 400 Hz | Powered by the phase – 1,000 V AC/DC | |
| Safety | IEC 61010 600 V CAT IV and 1000 V CAT III | IEC 61010 1000 V CAT IV | |
| Mechanical Specifications | |||
| Dimensions | 256 x 125 x 37 mm without sensor | 245 x 270 x 180 mm without sensor | |
| Weight | 900 g | 950 g | <3400 g |
| Casing | IP54 | IP67 | |
| Operating temperatures | -20 °C to +50 °C | 0 °C to +50 °C | -20°C to +50 °C |
Document Downloads
Chauvin Arnoux PEL110 Power & Energy Logger - Datasheet
Chauvin Arnoux PEL Adapter - Instruction Sheet
Chauvin Arnoux Reeling Box - User Manual
Chauvin Arnoux PEL112 & PEL113 Power & Energy Logger - User Manual
Chauvin Arnoux PEL110 Power & Energy Logger - Quick Start Guide
Chauvin Arnoux PEL110 Power & Energy Logger - IRD Server Application Note
Chauvin Arnoux PEL110 Power & Energy Logger - Motor Sensor Application Note
Additional Information
SKU
CA-PEL115
Chauvin Arnoux PEL115 Power & Energy Logger
£2,690.00
£3,228.00 inc vat
£2,690.00
£3,228.00 inc vat
