Reward Points
:
549
£658.80
£549.00
Home
Process, Industrial & Mechanical
Process Calibrators & Instruments
Voltage, Current & Loop Calibrators
Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator
The Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator simulates and measures DC current loop between 0 and 24mA and DC voltage between 0 and 20V. It can be used to calibrate instruments on-site and without removing them from processes.
This simple-to-use process signal calibrator accurately measures and simulates low-level signals encountered in industries such as metallurgy, steel, agri-food, hospitals and civil engineering. To this end, the Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator includes the following functions:
- Simulation: generates a DC current loop or DC voltage signal with precisely defined values; this signal is applied upstream of the measurement chain.
- Measurement: the values measured by the Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator can be compared to the readings determined by the panel meter; alternatively, the measurements can be compared to the simulated input value.
The Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator is battery-powered; it has a long battery life. However, it can also be connected to a mains supply for continuous operation.
The Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator is ideal for installers, maintenance technicians and industrial companies concerned with developing and verifying measurement chains.
Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator Key Features
- Simulates and measures DC current loop and DC voltage
- DC current loop: 0 to 24mA
- DC voltage: 0 to 24V
- Calibrate instruments on-site and without removing them from the process
- Simple-to-use
- Measure and simulate low-level industry signals
- Suitable for metallurgy, steel, agri-food, hospital and civil engineering sectors
- Simulated signals are applied upstream of the measurement chain
- Measured values can be compared to the panel meter or the simulated input value
- Long battery life
- Can be connected to the mains supply for continuous operation
- Ideal for installers, maintenance technicians and industrial companies concerned with developing and verifying measurement chains
What’s Included?
- Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator
- 2x Pairs of Test Wires
- 6x AAA 1.5V Batteries
- 1x User Manual in Five Languages
- 1x Carrying Bag
Chauvin Arnoux CA 1631 Voltage & Current Process Signal Calibrator Technical Specifications
| DC Voltage Input and Output Specifications | ||
| Calibre | Resolution | Accuracy ± (% of reading + counts) |
| 100 mV | 0.01 mV | 0.02 % + 3 |
| 20 V | 0.001 V | 0.02 % + 3 |
| Input impedance: | 2 MΩ (rated value), < 100 pF | |
| Protection against overvoltage | 30 V | |
| Current delivered by rated voltage | 1 mA | |
| DC current input and output specifications | ||
| Calibre | Resolution | Accuracy ± (% of reading + counts) |
| 24 mA | 0.001 mA | 0.015 % + 3 |
| Protection against overloads | 125 mA/250 V quick-response fuse | |
| Display as percentage | 0 % = 4 mA, 100 % = 20 mA | |
| Source mode | 1,000 Ω load at 20 mA for battery voltage ≥ 6.8 V, (700 Ω at 20 mA for a battery voltage between 5.8 and 6.8 V) | |
| Simulation | external loop voltage condition: 24 V (rated value), 30 V maximum, 12 V minimum | |
| Loop voltage supply | 24 V ± 10 % | |
| Power supply | 6 x 1.5 V | |
| Dimension | 205 x 97 x 45 mm | |
| Weight | 472 g (batteries included) | |
| Mains power supply | Input: 100 V – 240 VAC, 50–60 Hz 1.8 A | |
| Output: 12 VDC, 2 A MAX | ||
Reviews
Additional Information
| SKU | P01654402 |
|---|---|
| Manufacturer Part Code | P01654402 |
| Country of Origin | China |
