All C.Scope Products

C. Scope YIRS-8 General Purpose Sonde – 8kHz

SKU
YIRS-8
Rating:
0%
(0)
Reward Points
:
221
£265.68 £221.40
Advice & Support Call 01642 931329 or contact us
Price Match We won't be beaten, let us know
C. Scope YIRS-8 General Purpose Sonde – 8kHz

The C. Scope YIRS-8 General Purpose Sonde is a small, torpedo-shaped, hermetically sealed, battery-powered transmitter that can be used with one of C.Scope’s Cable Locators in Generator/ Transmitter mode to trace the direction of non-metallic pipes and locate blockages.

The C. Scope YIRS-8 General Purpose Sonde issues an 8kHz signal, and, depending on the site conditions and the C.Scope Cable Locator, can detect pipe blockages at a depth of up to 7m (23 feet).

The C. Scope YIRS-8 General Purpose Sonde can be screwed onto the end of a drain rod and then fed into a non-metallic pipe such as sewers, drains, and plastic gas and water mains.

The C. Scope YIRS-8 General Purpose Sonde provides a simple and cost-effective solution to determining the direction of non-metallic pipes and locating blockages.

C. Scope YIRS-8 General Purpose Sonde Key Features

  • A small, torpedo-shaped, hermetically sealed, battery-powered transmitter
  • For use with a C.Scope Cable Locator in Transmitter/ Generator mode
  • Trace the direction of non-metallic pipes
  • Locate blockages in non-metallic pipes
  • Issues an 8kHz signal
  • Can trace pipes and locate blockages at a depth of 7m (depending on site conditions and the C. Scope Cable Locator used)
  • Screw onto the end of a drain rod and then feed into a non-metallic pipe
  • Suitable for use in sewers, drains, and plastic and water mains
  • A simple and cost-effective solution to determining the direction of non-metallic pipes and locating blockages

What’s Included?

  • C. Scope YIRS-8 General Purpose Sonde – 8kHz
  • Rod Connector (fits standard drain rods with 7 T.P.I thread)

C. Scope YIRS-8 General Purpose Sonde Technical Specifications 

Frequency Transmits 8,192Hz 
Construction Rugged plastic casing, stainless steel stud. Epoxy resin filled
Detection Depth Range Up to 7m (23 foot) dependent on type of C.SCOPE Locator and site conditions
Dimensions 39mm diameter x 121mm long (1.5” x 4.7”)
End fitting M10 threaded stud
Supplied with Rod Connector to fit standard drain rods with 7 T.P.I. thread
Battery Type 1 x AA, LR6 Alkaline
Battery Life Up to 15 hours
Approvals EN301 489 EN300 330
IP Rating 68
C. Scope General Purpose Sondes - Datasheet Datasheets C.Scope Accessory Range for Pipe & Cable Location Equipment - User Manual Manuals & Guides

Reviews

Additional Information
SKU YIRS-8
Manufacturer Part Code YIRS-8
Country of Origin United Kingdom