Discontinued
or Call 01642 931 329 to discuss alternatives
Home
Electrical, EV & Electronic
Electrical Test Equipment (18th Edition)
Cable Locators, Wire Tracers & Fuse Finders
Beha-Amprobe AT-6010-TE Transmitter
The Beha-Amprobe AT-6010-TE Transmitter issues a signal through wires/ cables that is detected by the Beha-Amprobe AT-6010-RE Receiver (sold separately), allowing the user to trace and locate wires, breakers and fuses behind walls, ceilings and floors. Please see the video below for an introduction to Beha-Amprobe’s AT-6010-EUR Series of Wire Tracing Tools.
Advanced Wire Tracer: AT-6010-EUR - easy location of wires, breakers and fuses
The Beha-Amprobe AT-6010-TE Transmitter is suitable for use on energised and de-energised circuits up to 600V AC/DC in Category I-III environments. This means that energised circuits may be mapped/ traced without taking equipment offline.
The Beha-Amprobe AT-6010-TE Transmitter’s High mode is intended for general tracing applications whilst its Loop mode is designed for locating shorts. Additionally, the Beha-Amprobe AT-6010-TE Transmitter features two tracing frequencies, 6kHz (energised) and 33kHz (de-energised), which are automatically engaged based on the detected voltage.
When used in conjunction with the Beha-Amprobe AT-6010-RE Receiver, the Beha-Amprobe AT-6010-TE Transmitter can be used for the following applications:
- Tracing energised and de-energised wires
- Identifying breakers and fuses
- Finding breaks and opens
- Finding shorts
- Tracing wires in metal conduits
- Tracing non-metallic pipes and conduits
- Tracing shielded wires
- Tracing underground wires
- Tracing low voltage wires and data cables
- Sorting bundled wires
- Mapping circuits with test leads
- Tracing breakers on systems with light dimmers
Moreover, when used with the Beha-Amprobe CT-400-EUR Signal Clamp (NOT included), the Beha-Amprobe AT-6010-TE Transmitter and Beha-Amprobe AT-6010-RE Receiver can trace closed circuits as well as map circuits that do not have bare conductors.
The Beha-Amprobe AT-6010-TE Transmitter is a simple yet versatile tool suitable for a range of tracing, mapping and locating applications.
Beha-Amprobe AT-6010-TE Transmitter Key Features
- Issues a signal through wires or cables to be detected by the Beha-Amprobe AT-6010-RE Receiver (sold separately)
- Trace and locate wires, breakers and fuses behind walls, ceilings and floors
- Suitable for use on energised and de-energised circuits up to 600V in Category I-III environments
- Energised circuits can be traced/ mapped without taking equipment offline
- High mode: for general tracing applications
- Loop mode: for locating shorts
- Two tracing frequencies: 6kHz (energised) and 33kHz (de-energised)
- Based on the detected voltage the most appropriate tracing frequency is automatically engaged
- Can be used with Beha-Amprobe CT-400-EUR Signal Clamp (NOT included) to trace circuits without accessible bare conductors
- Simple yet versatile tool suitable for a range of tracing, mapping and locating applications
What’s Included?
- Beha-Amprobe AT-6010-TE Transmitter
Beha-Amprobe AT-6010-TE Transmitter Technical Specifications
| Measurement category | CAT III 600 V |
| Operating voltage | 0 to 600 V AC/DC |
| Operating frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Hazardous voltage detection | > 30 V AC/DC |
| Signal indications | LEDs |
| Response time | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
| Current output of signal (typical) |
Energized circuit: HI mode: 60 mA RMS |
| De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
|
| Signal voltage output (nominal) |
De-energized circuit: HIGH: 33V RMS, 140 Vp-p |
| With CT-400: loop mode: 31 V RMS, 120 Vp-p | |
| Range detection (open air) | - |
| Display size | - |
| Display dimensions (W x H) | - |
| Display type | LEDs |
| Display colour | Operating mode LEDs: red, Battery status LEDs: red |
| Booting time | < 2 sec |
| Backlight | - |
| Operating temperature | -20 °C to 50 °C (-4 °F to 122 °F ) |
| Operating humidity | -20 °C to <10 °C (45%: -4 °F to <50 °F), 10 °C to <30 °C (95%: 50 °F to <86 °F) |
| 30 °C to <40 °C (75%: 86 °F to <104 °F), 40 °C to 50 °C (45%: 104 °F to 122 °F) | |
| Storage temperature and humidity |
-20 °C to 70 °C (-4 °F to 158 °F ), <95% RH |
| Operating altitude | 0 to 2000 m (6561 ft) |
| Transient protection | 6.00 kV (1.2/50μS surge) |
| Pollution degree | 2 |
| IP rating | IP40 |
| Drop test | 1 m (3.28 ft) |
| Power supply | 8 x AA (alkaline) |
| Power consumption (typical) | Hi mode: 70 mA |
| Loop mode with Clamp: 90 mA | |
| Consumption without signal transmission: 10 mA | |
| Battery life | Hi mode: approx. 25 h |
| Loop mode: approx. 18 h | |
| Low battery indication | • |
| Fuse | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
| Maximum conductor Size | - |
| Dimensions (L x W x H) | Approx. 183 x 93 x 50 mm (7.2 x 3.66 x 1.97 in) |
| Weight | Approx. 0.57 kg (1.25 lb) |
People Also Bought
Reviews
Additional Information
| SKU | 5044684 |
|---|---|
| Manufacturer Part Code | 5044684 |
