Discontinued
or Call 01642 931 329 to discuss alternatives
Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter - (Fixed Installation)
Accurate, durable, and economical, the Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter is a clamp-on liquid flow meter combining state-of-the-art flow measurement capability with a low-cost transmitter package that can be installed at the process measurement point. The two versions of the Panametrics AT600 available (see drop-down) are the most commonly configured/requested models and are ready to use straight out of the box. The two versions differ regarding their input power; please see the table below for more details.
| SKU | AT6-C1-AT10-4-IN-3-1-A-FT-01-M-0 |
| Flow Meter | AT600 Clamp-on Liquid Ultrasonic Flow Meter with Transducers, a clamping fixture, transducer cable, and coupling |
| Clamp-on System | Single-channel clamp-on system |
| Transducer System | C-AT transducers, 1 MHz, IP68, 4 to 24 in./100 to 600 mm typ., Tprocess: -40 to 150°C |
| Pipe Size (Nominal Outside Diameter) | 4 |
| Pipe Units | Inches |
| Cable Length | 50ft (15m) Transducer Cable |
| AT Power (Input Power) | 85 to 265 VAC |
| Analogue and Digital Output | 4-20mA analogue output only |
| Discrete output | One frequency output and one totalizer (pulse) output |
| Language | English |
| Default Units | Metric |
| Special | No specials |
Completely digital, the Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter does not have any moving parts; therefore, it requires minimal maintenance. The Panametrics AT600 also features an onboard microprocessor that uses patented correlation transit-time technology for long-term, drift-free operation. In addition to this, it includes a dynamically configured operating system with automatic adjustment which adapts to changing fluid properties.
The Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter delivers velocity, volumetric, and totalised flow outputs. It is ideal for conducting non-invasive flow measurements on a wide range of pipe sizes and materials, including lined pipes, and includes a permanent solid couplant for clamp-on applications.
The Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter is a rugged, reliable, precise non-invasive flow meter.
Applications
The Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter is designed for specifically measuring the flow of water and wastewater in full pipes. However, it can also be used to measure the following:
- Potable water
- Sewage
- Discharge water
- Treated water
- Cooling and heating water
- Irrigation water
- Other industrial fluids
Basic Set-Up
Panametrics AT600 Clamp on Flow Meter - CRS basic setup
Unboxing
Panametrics AT600 Clamp On Flow meter Unboxing CRS
How to attach using AT20 Clamp
How to attach Panametrics AT20 clamping fixture for AT600 AquaTrans Ultrasonic Flow Meter
Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter Key Features
- Accurate, durable, and economical clamp-on, ultrasonic, liquid flow meter
- Combines state-of-the-art flow measurement capability with a low-cost transmitter package
- Can be installed at the process measurement point
- The options available are the most commonly configured/requested
- Other configurations are available
- Completely digital
- No moving parts
- Minimal maintenance
- The onboard microprocessor uses patented correlation transit-time technology for long-term, drift-free operation
- Dynamically configured operating system
- Automatic adjustment adapts to changing fluid properties
- Velocity, volumetric, and totalised flow outputs
- Non-invasive flow measurements
- Can be used with a wide range of pipe sizes and materials
- Suitable for measuring flow inside lined pipes
- Permanent solid couplant for clamp-on applications
- Rugged, reliable, precise non-invasive flow meter
- Optimised for measuring the flow of water and wastewater inside full pipes
What’s Included?
- Your Choice of Panametrics AquaTrans AT600 Ultrasonic Liquid Flow Meter
- Transducers
- Clamping Fixture
- Transducer Cable
- Couplant
Panametrics AquaTrans™ AT600 Ultrasonic Liquid Flow Meter Technical Specifications
| Overall Operation and Performance | |
| Fluid Types | Liquids: acoustically conductive fluids, including most clean liquids, and many liquids with small amounts of entrained solids or gas bubbles |
| Flow Measurement | Patented Correlation Transit-TimeTM model |
| Pipe Sizes | 2 to 24in (50 to 600mm) standard |
| Other sizes available upon request | |
| Pipe Materials | All metals and most plastics. Consult GE for concrete, composite materials, and highly corroded or lined pipes. |
| Accuracy | ±1% of reading in application |
| ±0.5% in field calibration | |
| Installation assumes a fully developed, symmetrical flow profile (typically 10 diameters upstream and 5 diameters downstream of straight pipe run). Final installation accuracy is a function of multiple factors including fluid, temperature range, pipe centricity, and other. | |
| Calibration | All meters are water calibrated and delivered with a traceable calibration certificate. |
| Repeatability | ±0.2% of reading |
| Range (Bidirectional) | -40 to 40 ft/s (-12.19 to 12.19 m/s) |
| Rangability (Overall) | 400:1 |
| Measurement Parameters | Velocity, Volumetric, and Totalized Flow |
| Electronics | |
| Enclosure | Epoxy-coated aluminum weatherproof Type 4X/IP67 |
| Dimensions | 6.6 x 5.0 x 2.4in (168 x 128 x 61mm) |
| Weight | 3.5 lbs/1.5kg |
| Channels | One channel |
| Display | Graphic LCD (128 x 64 pixels |
| Keypad | Six-button keypad, for full functionality operation |
| Error Display Indicator | Green or red light |
| Power Supplies | Standard: 85 to 265 VAC, 50/60 Hz |
| Optional: 12 to 28 VDC, ± 5% | |
| Power Consumption | 10 Watts in rush |
| 5 Watts normal operation | |
| Operating Temperature | -4°F to 131°F (–20°C to 55°C) |
| Storage Temperature | –40°F to 158°F (–40°C to 70°C) |
| Outputs (Based on Configuration) | 4-20mA (24VDC powered, 600Ω maximum load, 1500 VDC Isolation) |
| Frequency, Pulse, Alarm (Passive output, 100VDC, 1A/1W maximum, 1500 VDC isolation) | |
| HART (FSK modulation, Category Flow, Protocol Version 7.5, Device Revision 2, MFG ID 157, Device Type Code 127, Number of device variables 34) | |
| Modbus/RS485 (Half-duplex, 1500 VDC Isolation) | |
| Analogue outputs Namur NE 43 compliant | |
| Certification | CE, UL, CSA, MCert |
| Clamp-On Ultrasonic Flow Transducers | |
| Temperature Ranges | Standard: -40°F to 302°F (-40°C to 150°C) |
| Optional: -328°F to 752°F (-200°C to 400°C) | |
| See specific transducer for exact temperature range. | |
| Mounting Fixture | Anodized aluminum with stainless steel strapping |
| Couplant | Solid couplant standard |
| Rating | Standard: General purpose (IP66 or IP68) See transducer for exact rating |
Reviews
Additional Information
| SKU | AT6-C1AT104IN31AFT01M-0 |
|---|---|
| Manufacturer Part Code | AT6C1AT104IN31AFT01M0 |
