Alternatives Available
or Call 01642 931 329 to discuss alternatives
or Call 01642 931 329 to discuss alternatives
The Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit can be used to locate energised and de-energised wires, breakers and fuses safely and easily. This kit functions by connecting the transmitter to the circuit and using the receiver to detect the signal in the wires and cables behind walls, ceilings and floors. For a quick introduction to the Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit, please see the following video.
The transmitter is suitable for use on energised and de-energised circuits up to 600V AC/DC in category I through to category III electrical environments; it enables the user to work on energised circuits without having to take the equipment offline thereby reducing downtime.
In addition to this, the transmitter is equipped with two optimal tracing frequencies which are automatically activated based on the detected voltage. It also includes a high signal mode for general tracing and a loop mode for locating shorts. These features make the Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit suitable for the following applications:
The Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit is suitable for use on RCD-protected circuits. When used with a signal clamp, the Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit can trace closed-loop circuits. The Beha-Amprobe CT-400 Signal Clamp induces a tracing signal on the cable allowing the user to map circuits where there is no access to bare conductors. The Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit is also compatible with standard test leads.
The receiver allows the user to locate wires easily as it will issue an audible alert and is equipped with a two-digit readout with a bar-graph. The sensitivity of the Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit can be adjusted and its tip sensor allows the user to trace wires in tight spaces. The transmitter is also optimised for simplicity of use as it features an easy-to-use one-button operating system.
The Beha-Amprobe AT-6010-EUR Advanced Wire Tracer Kit is a simple-to-use, safe and versatile cable location kit.
Features | AT-6010-RE Receiver | AT-6010-TE Transmitter |
Measurement category | CAT III 600 V | CAT III 600 V |
Operating voltage | 0 to 600 V AC/DC | 0 to 600 V AC/DC |
Operating frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
Hazardous voltage detection | - | > 30 V AC/DC |
Signal indications | Numeric, bar graph display and audible beep | LEDs |
Response time |
Tip Sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
Current output of signal (typical) | - |
Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
Signal voltage output (nominal) | - |
De-energized circuit: HIGH: 33V RMS, 140 Vp-p With CT-400: loop mode: 31 V RMS, 120 Vp-p |
Range detection (open air) |
Tip sensor (Energized): Max distance via air: up to 6.1 m (20 ft) Pinpointing: approx. 5 cm (1.97 in) Tip sensor (De-energized): Max distance via air: up to 4.5 m 14.7 ft Pinpointing: approx. 5 cm 1.97 in |
- |
Specifications | AT-6010-RE Receiver | AT-6010-TE Transmitter |
Display size | LCD 6.35 cm (2.5 in) | - |
Display dimensions (W x H) | 36.72 x 48.96 mm (1.45 x 1.93 in) | - |
Display type | Segment LCD | LEDs |
Display colour | Black and white | Operating mode LEDs: red, Battery status LEDs: red |
Booting time | < 3 sec | < 2 sec |
Backlight | • | - |
Operating temperature | -20 °C to 50 °C (-4 °F to 122 °F ) | |
Operating humidity |
-20 °C to <10 °C (45%: -4 °F to <50 °F), 10 °C to <30 °C (95%: 50 °F to <86 °F) 30 °C to <40 °C (75%: 86 °F to <104 °F), 40 °C to 50 °C (45%: 104 °F to 122 °F) |
|
Storage temperature and humidity | -20 °C to 70 °C (-4 °F to 158 °F ), <95% RH | |
Operating altitude | 0 to 2000 m (6561 ft) | |
Transient protection | - | 6.00 kV (1.2/50μS surge) |
Pollution degree | 2 | 2 |
IP rating | IP 52 | IP 40 |
Drop test | 1 m (3.28 ft) | 1 m (3.28 ft) |
Power supply | 4 x AA (alkaline) | 8 x AA (alkaline) |
Power consumption (typical) | 70 mA |
Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA |
Battery life | Approx. 25 h |
Hi mode: approx. 25 h Loop mode: approx. 18 h |
Low battery indication | • | • |
Fuse | - | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
Maximum conductor Size | - | - |
Dimensions (L x W x H) | Approx. 183 x 75 x 43 mm (7.2 x 2.95 x 1.69 in) | Approx. 183 x 93 x 50 mm (7.2 x 3.66 x 1.97 in) |
Weight | Approx. 0.27 kg (0.6 lb) | Approx. 0.57 kg (1.25 lb) |
SKU | 5044669 |
---|---|
Manufacturer Part Code | 5044669 |
Country of Origin | China |