Reward Points
:
73
£87.84
£73.20
Beha-Amprobe LAN-1 LAN Cable Tester
Use the Beha-Amprobe LAN-1 Cable Tester to test for shorts, opens and miswired cable installations of various types. The product is simple to use, lightweight, handheld and is capable of working with multiple types of data cables and connectors.
It features a useful LED indicator or go/no-go when testing, and also features the ability to test wiring one at a time or you can choose to automatically pulse through pin-outs and gain a reading of the results.
The Beha-Amprobe LAN-1 is ideally suited for testing the pin configuration of:
- 10/100 base-T cables
- 10-base 2 cables
- RJ45 modular cables
- AT&T 258A cables
- EIA/TIA 568A/568B cables
- Token ring cables
Key Features
- Verification of cable wiring – including opens, shorts or incorrect wiring
- Tests cables installed on wall plates or on patch panels by use of remote termination module
- Performs loopback tests and remote tests
- Audible buzzer noise when error is are detected
- Two sets of LED lights for source and test indication
- Tests lines of up 300 metres
- Compatible with RJ45 and BNC connector types
Supplied in Your Purchase
- Beha-Amprobe LAN-1 Lan Cable Tester
- Remote Terminator
- 1 ea RJ45 to female BNC cable
- 1 ea RJ45 to male BNC cable
- 1 ea 1 RJ45 to RJ45 cable
- 1 ea female BNC to female BNC connector
- 9 volt battery
- User manual
Beha-Amprobe LAN-1 Technical Specifications
| Cable Types Tested | 10/100 base-T 10 base-2 RJ45 AT&T 258A EIA / TIA 568A/568B Token Ring |
| Continuity Max Length | >300m |
| Connector Types | RJ45, BNC |
| Display | 18 LEDs: 9 red and 9 green, 9 LEDs on remote module |
| Battery | Standard 9V battery, NEDA 1604A, JIS 006P, IEC 6F22 |
| Low Battery Indicator | The LED indicator will not turn on when BATT button is pushed |
| Operating Environment | 0 to 40°C (32 to 104°F) 10 to 70% RH |
Reviews
Additional Information
| SKU | 3052401 |
|---|---|
| Manufacturer Part Code | 3052401 |
| Model Ref | Amprobe LAN-1 |
| Country of Origin | Taiwan |
